Toyota RAV4 HybridDetail parametersThe Toyota RAV4 Hybrid has 1 detail parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardInspection mode RAV4HYBRID_INSPECTION_MODEConfirmedRequest21 A6Service 21PID A6Module7B0 → 7B8Every1 sTesting for 2016, 2018 to 2026Example reply from a 2017 Toyota RAV4 Hybrid.Bit 0 of the reply.0b0 = 0 → 0FormulavalRange0 to 1UnitOff or onConfirmed for 2017. In testing for 2016, 2018 to 2021, 2026. Not supported for 2022 to 2025.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Inspection mode RAV4HYBRID_INSPECTION_MODEConfirmedRequest21 A6Service 21PID A6Module7B0 → 7B8Every1 sTesting for 2016, 2018 to 2026Example reply from a 2017 Toyota RAV4 Hybrid.Bit 0 of the reply.0b0 = 0 → 0FormulavalRange0 to 1UnitOff or onConfirmed for 2017. In testing for 2016, 2018 to 2021, 2026. Not supported for 2022 to 2025.
