Toyota Sequoia
Detail parameters The Toyota Sequoia has 1 detail parameter.
● Confirmed ◆ In testing ○ Supported × Not supported
How to read parameter cards How to read a parameter card Inspection mode SEQUOIA_INSPECTION_MODEConfirmed Request 21 A6Service 21 PID A6Module 7B0 → 7B8Every 60 sTesting for 2000 to 2012, 2014 to 2017, 2019, 2021 to 2026
Bit 0 of the reply.
Formula valRange 0 to 1 Unit Off or on Confirmed for 2013, 2018, 2020. In testing for 2000 to 2005, 2007 to 2012, 2014 to 2017, 2019, 2021 to 2022, 2026. Not supported for 2006, 2023 to 2025.
The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents. Where the parameter is in the response, and how Pelican converts the raw value into a value. A real reply, decoded. The raw value comes first, then the reading. Which model years have tested this parameter. 