Pelican
Get the app

Toyota FJ Cruiser

Connectable parameters

The Toyota FJ Cruiser has 31 Connectables, parameters that Pelican can monitor automatically.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Fuel level, volume FJ_FLI_VOLConfirmed

Pelican can show this parameter as the fuel tank level.

  • Request21 29
  • Service 21PID 29
  • Module7C0 → 7C8
  • Every5 s
  • Testing for 2006 to 2010, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 500 ÷ 3785) = 0 gal

Formula
(val × 500 ÷ 3785)
Range
0 to 21 gal
Unit
gal

Confirmed for 2011 to 2013. In testing for 2006, 2009, 2014. Not supported for 2007 to 2008, 2010.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Fuel tank level

Fuel level FJ_FUEL_LEVEL

Pelican can show this parameter as the fuel tank level.

  • Request22 10 22
  • Service 22DID 1022
  • Module7C0 → 7C8
  • Every30 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 100)
Range
0 to 655.35 L
Unit
L

In testing for 2006, 2009, 2011, 2014. Not supported for 2007 to 2008, 2010, 2012 to 2013.

Fuel level, volume FJ_FLI_VOLConfirmed

Pelican can show this parameter as the fuel tank level.

  • Request21 29
  • Service 21PID 29
  • Module7C0 → 7C8
  • Every5 s
  • Testing for 2006 to 2010, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 500 ÷ 3785) = 0 gal

Formula
(val × 500 ÷ 3785)
Range
0 to 21 gal
Unit
gal

Confirmed for 2011 to 2013. In testing for 2006, 2009, 2014. Not supported for 2007 to 2008, 2010.

Speed

Speed FJ_VSS_7C0Confirmed

Pelican can show this parameter as the speed.

  • Request21 21
  • Service 21PID 21
  • Module7C0 → 7C8
  • Every250 ms
  • Testing for 2006 to 2011, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2012 to 2013. In testing for 2006, 2009, 2011, 2014. Not supported for 2007 to 2008, 2010.

Vehicle speed FJ_VSSConfirmed

Current vehicle speed.

Pelican can show this parameter as the speed.

  • Request21 21
  • Service 21PID 21
  • Module7B0 → 7B8
  • Every200 ms
  • Testing for 2006 to 2010, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → (0 × 1.35) = 0 km/h

Formula
(val × 1.35)
Range
0 to 323.85 km/h
Unit
km/h

Confirmed for 2011 to 2013. In testing for 2006, 2009, 2014. Not supported for 2007 to 2008, 2010.

Vehicle speed FJ_VEHICLE_SPEED_7E0Confirmed

Pelican can show this parameter as the speed.

  • Request21 01
  • Service 21PID 01
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2011, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 80 to 87 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2010, 2012 to 2013. In testing for 2006, 2009, 2011, 2014. Supported for 2007 to 2008.

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Request01 0D
  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2008, 2010. Supported for 2007, 2011 to 2013.

Odometer

Odometer FJ_ODO

Pelican can show this parameter as the odometer.

  • Request21 28
  • Service 21PID 28
  • Module7E0 → 7E8
  • Every5 s

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

Supported for 2007 to 2008. Not supported for 2010 to 2013.

CheckEngineLightOn

Malfunction indicator lamp MILSAE J1979Confirmed

The MIL status is OFF during key-on, engine-off bulb check unless MIL has also been commanded ON for a detected malfunction. The status reflects whether there are confirmed DTC(s) stored that are illuminating the MIL. It should not reflect the status of the MIL, which could be on for a function check, flashing I/M readiness or flashing for misfire.

Pelican can show this parameter as the checkEngineLightOn.

  • Request01 01
  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 0 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2010. Supported for 2007 to 2008, 2011 to 2013.

Commanded lambda

Commanded equivalence ratio EQ_RATSAE J1979Confirmed

Fuel systems that utilize conventional oxygen sensor display the inverse of the commanded open loop equivalence ratio (also known as lambda) while the fuel control system is in open loop. Will indicate 1.000 while in closed-loop fuel.

Pelican can show this parameter as the commanded lambda.

  • Request01 44
  • Service 01PID 44
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 2 ÷ 65535)
Range
0 to 1.99
Unit
Number

Confirmed for 2007 to 2008, 2010, 2012 to 2013.

Distance since trouble codes were cleared

Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed

Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request01 31
  • Service 01PID 31
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2007 to 2008, 2010 to 2013.

Engine coolant temperature

Engine coolant temperature FJ_ECT_7C0Confirmed

Pelican can show this parameter as the engine coolant temperature.

  • Request21 23
  • Service 21PID 23
  • Module7C0 → 7C8
  • Every5 s
  • Testing for 2006 to 2011, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x01 = 1 → (1 ÷ 2) = 0.5 °C

Formula
(val ÷ 2)
Range
0 to 127.5 °C
Unit
°C

Confirmed for 2012 to 2013. In testing for 2006, 2009, 2011, 2014. Not supported for 2007 to 2008, 2010.

Engine coolant temperature ECTSAE J1979Confirmed

Your engine temperature must operate within a certain temperature range to operate efficiently and safely. If it runs too hot, then your engine could be permanently damaged. If it runs too cold, then your engine will use more fuel than necessary.

Pelican can show this parameter as the engine coolant temperature.

  • Request01 05
  • Service 01PID 05
  • Module7E0 → 7E8
  • Every500 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2008, 2010, 2013. Supported for 2007, 2011 to 2012.

Engine load

Calculated engine load LOAD_PCTSAE J1979Confirmed

Represents the amount of work the engine is doing. Expected to reach 100% at wide open throttle/wide open pedal at any altitude, temperature or rpm for both naturally aspirated and boosted engines. If engine load is limited for powertrain protection e.g. engine/turbocharger protection, this value may not reach 100%. For hybrid vehicles, indicates the torque produced only by the internal combustion engine, not the torque being delivered by the entire powertrain. For electric vehicles, the meaning of this parameter is undefined.

Pelican can show this parameter as the engine load.

  • Request01 04
  • Service 01PID 04
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2007 to 2008, 2010, 2012 to 2013. Supported for 2011.

Engine oil temperature

Engine oil temperature FJ_EOTConfirmed

Pelican can show this parameter as the engine oil temperature.

  • Request21 51
  • Service 21PID 51
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006 to 2009, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 72 to 79 of the reply, 8 bits.

0x4B = 75 → (75 − 40) = 35 °C

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2010 to 2013. In testing for 2006, 2009, 2014. Not supported for 2007 to 2008.

Engine speed

Average engine speed of all cylinders FJ_AV_RPM_ALL_CYL

Pelican can show this parameter as the engine speed.

  • Request21 54
  • Service 21PID 54
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 64 to 79 of the reply, 16 bits.

Formula
(val × 25 ÷ 32)
Range
0 to 51199 rpm
Unit
rpm

In testing for 2006, 2008 to 2014. Not supported for 2007.

Mass air flow

Air flow rate from mass air flow sensor MAFSAE J1979Confirmed

Pelican can show this parameter as the mass air flow.

  • Request01 10
  • Service 01PID 10
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 100)
Range
0 to 655.35 g/s
Unit
g/s

Confirmed for 2008, 2010, 2013. Supported for 2007, 2011 to 2012.

Mass air flow FJ_MAF_7E0Confirmed

Pelican can show this parameter as the mass air flow.

  • Request21 01
  • Service 21PID 01
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2011, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 24 to 39 of the reply, 16 bits.

0x0054 = 84 → (84 ÷ 100) = 0.84 g/s

Formula
(val ÷ 100)
Range
0 to 655.35 g/s
Unit
g/s

Confirmed for 2010, 2012 to 2013. In testing for 2006, 2009, 2011, 2014. Supported for 2007 to 2008.

O2 lambda

Air-fuel equivalence ratio, bank 1 sensor 1 FJ_AF_LAMBDA_B1S1Confirmed

Pelican can show this parameter as the O2 lambda.

  • Request21 04
  • Service 21PID 04
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2011, 2013 to 2014

Bits 16 to 31 of the reply, 16 bits.

Formula
(val × 1.99 ÷ 65535)
Range
0 to 1.99
Unit
Number

Confirmed for 2010, 2012. In testing for 2006, 2009, 2011, 2014. Supported for 2007 to 2008. Not supported for 2013.

Lambda value, Equivalence Ratio Bank 1, Sensor 1 LAMBDA11_VOLTSAE J1979Confirmed

Pelican can show this parameter as the O2 lambda.

  • Request01 24
  • Service 01PID 24
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 32768)
Range
0 to 1.99
Unit
Number

Confirmed for 2008, 2010. Supported for 2007, 2011 to 2013.

Lambda value, Equivalence Ratio Bank 1, Sensor 1 LAMBDA11_CURRENTSAE J1979Confirmed

Pelican can show this parameter as the O2 lambda.

  • Request01 34
  • Service 01PID 34
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 32768)
Range
0 to 1.99
Unit
Number

Confirmed for 2008, 2010. Supported for 2007, 2012 to 2013.

Short term fuel trim

Short term fuel trim (bank 1) SHRTFT1SAE J1979Confirmed

Correction being used by the closed-loop fuel algorithm.

Pelican can show this parameter as the short term fuel trim.

  • Request01 06
  • Service 01PID 06
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 128 − 100)
Range
-100 to 99.2 %
Unit
%

Confirmed for 2010. Supported for 2007 to 2008, 2011 to 2013.

Short term fuel trim (bank 2) SHRTFT2SAE J1979Confirmed

Correction being used by the closed-loop fuel algorithm.

Pelican can show this parameter as the short term fuel trim.

  • Request01 08
  • Service 01PID 08
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 128 − 100)
Range
-100 to 99.2 %
Unit
%

Confirmed for 2010. Supported for 2007 to 2008, 2011 to 2013.

Short term fuel trim, bank 1 FJ_SHORT_FT_B1Confirmed

Pelican can show this parameter as the short term fuel trim.

  • Request21 03
  • Service 21PID 03
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2011, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 16 to 23 of the reply, 8 bits.

0x80 = 128 → (128 × 200 ÷ 256 − 100) = 0 %

Formula
(val × 200 ÷ 256 − 100)
Range
-100 to 99.21 %
Unit
%

Confirmed for 2010, 2012 to 2013. In testing for 2006, 2009, 2011, 2014. Supported for 2007 to 2008.

Short term fuel trim, bank 2 FJ_SHORT_FT_B2Confirmed

Pelican can show this parameter as the short term fuel trim.

  • Request21 03
  • Service 21PID 03
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006, 2009, 2011, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 32 to 39 of the reply, 8 bits.

0x80 = 128 → (128 × 200 ÷ 256 − 100) = 0 %

Formula
(val × 200 ÷ 256 − 100)
Range
-100 to 99.21 %
Unit
%

Confirmed for 2010, 2012 to 2013. In testing for 2006, 2009, 2011, 2014. Supported for 2007 to 2008.

Starter battery voltage

B+ battery voltage FJ_BATTERY_VOLTAGE_7C0

Pelican can show this parameter as the starter battery voltage.

  • Request22 10 21
  • Service 22DID 1021
  • Module7C0 → 7C8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10)
Range
0 to 20 V
Unit
V

In testing for 2006, 2009, 2014. Not supported for 2007 to 2008, 2010 to 2013.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2010, 2013. Supported for 2007 to 2008, 2011.

StoredDTCCount

Number of DTCs stored in this ECU DTC_CNTSAE J1979Confirmed

Number of confirmed emission-related DTCs stored in the ECU available for display using Service $03.

Pelican can show this parameter as the storedDTCCount.

  • Request01 01
  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bits 1 to 7 of the reply, 7 bits.

Formula
val
Range
0 to 127
Unit
Number

Confirmed for 2010. Supported for 2007 to 2008, 2011 to 2013.

Throttle position

Absolute throttle position TPSAE J1979Confirmed

Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.

Pelican can show this parameter as the throttle position.

  • Request01 11
  • Service 01PID 11
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2008, 2010. Supported for 2007, 2011 to 2013.

Absolute throttle position B TP_BSAE J1979Confirmed

Pelican can show this parameter as the throttle position.

  • Request01 47
  • Service 01PID 47
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2010. Supported for 2008.

Transmission fluid temperature

Transmission temperature, pan FJ_ATF_PAN_TConfirmed

Pelican can show this parameter as the transmission fluid temperature.

  • Request21 82
  • Service 21PID 82
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006 to 2010, 2013 to 2014

Example reply from a 2012 Toyota FJ Cruiser.

Bits 0 to 15 of the reply, 16 bits.

0x5C80 = 23680 → (23680 ÷ 256 − 40) = 52.5 °C

Formula
(val ÷ 256 − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2011 to 2012. In testing for 2006, 2009, 2014. Not supported for 2007 to 2008, 2010, 2013.

Transmission temperature, torque converter FJ_ATF_TQC_TConfirmed

Pelican can show this parameter as the transmission fluid temperature.

  • Request21 82
  • Service 21PID 82
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2006 to 2010, 2013 to 2014

Example reply from a 2012 Toyota FJ Cruiser.

Bits 16 to 31 of the reply, 16 bits.

0x5C80 = 23680 → (23680 ÷ 256 − 40) = 52.5 °C

Formula
(val ÷ 256 − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2011 to 2012. In testing for 2006, 2009, 2014. Not supported for 2007 to 2008, 2010, 2013.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.