Pelican
Get the app

Toyota FJ Cruiser

Fluid parameters

The Toyota FJ Cruiser has 1 fluid parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance since oil change FJ_OIL_CHANGE_ODOConfirmed

  • Request21 41
  • Service 21PID 41
  • Module7C0 → 7C8
  • Every30 s
  • Testing for 2006 to 2012, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x14 = 20 → (20 × 2514600 ÷ 15625) = 3,218.688 km

Formula
(val × 2514600 ÷ 15625)
Range
0 to 41038.272 km
Unit
km

Confirmed for 2013. In testing for 2006, 2009, 2011, 2014. Not supported for 2007 to 2008, 2010, 2012.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance since oil change FJ_OIL_CHANGE_ODOConfirmed

  • Request21 41
  • Service 21PID 41
  • Module7C0 → 7C8
  • Every30 s
  • Testing for 2006 to 2012, 2014

Example reply from a 2013 Toyota FJ Cruiser.

Bits 0 to 7 of the reply, 8 bits.

0x14 = 20 → (20 × 2514600 ÷ 15625) = 3,218.688 km

Formula
(val × 2514600 ÷ 15625)
Range
0 to 41038.272 km
Unit
km

Confirmed for 2013. In testing for 2006, 2009, 2011, 2014. Not supported for 2007 to 2008, 2010, 2012.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.