Ford F-250

Cruise control parameters

The Ford F-250 has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Target speed F250_CC_TGT_VSSConfirmed

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every500 ms
  • Testing for 1999 to 2021

Example reply from a 2026 Ford F-250.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 × 3.6 ÷ 10) = 0 km/h

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

Confirmed for 2022 to 2026. In testing for 1999, 2002 to 2005, 2007 to 2009, 2012 to 2015, 2018. Not supported for 2000 to 2001, 2006, 2010 to 2011, 2016 to 2017, 2019 to 2021.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Target speed F250_CC_TGT_VSSConfirmed

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every500 ms
  • Testing for 1999 to 2021

Example reply from a 2026 Ford F-250.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 × 3.6 ÷ 10) = 0 km/h

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

Confirmed for 2022 to 2026. In testing for 1999, 2002 to 2005, 2007 to 2009, 2012 to 2015, 2018. Not supported for 2000 to 2001, 2006, 2010 to 2011, 2016 to 2017, 2019 to 2021.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.