Fuel parameters
The Cupra Formentor has 4 fuel parameters.
● Confirmed◆ In testing○ Supported× Not supported
Engine fuel rate FUEL_RATESAE J1979Confirmed
Measured in units per hour
Pelican can show this parameter as the fuel rate.
- Request
01 5E - Service 01
PID 5E - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val ÷ 20)- Range
- 0 to 3212.75 L/h
- Unit
- L/h
Confirmed for 2022 to 2025. Supported for 2026.
Fuel level FORMENTOR_FLI_FC00Confirmed
- Request
22 14 B4 - Service 22
DID 14B4 - Module
FC00 → FE0076 - Every
30 s - Testing for 2020 to 2024, 2026
Bits 0 to 15 of the reply, 16 bits. The value is signed.
- Formula
(val × 100 ÷ 10000)- Range
- -327.68 to 327.67 L
- Unit
- L
Confirmed for 2025. In testing for 2020 to 2021, 2023 to 2024, 2026. Not supported for 2022.
Fuel tank fill level FORMENTOR_FUEL_TANK_FILL_LEVEL_V2Confirmed
- Request
22 24 FC - Service 22
DID 24FC - Module
FC00 → FE0076 - Every
1 s - Testing for 2020 to 2024, 2026
Bits 0 to 15 of the reply, 16 bits.
- Formula
(val × 1000 ÷ 10000)- Range
- 0 to 6553.5 L
- Unit
- L
Confirmed for 2025. In testing for 2020 to 2021, 2023 to 2024, 2026. Not supported for 2022.
Fuel tank level FLISAE J1979Confirmed
Pelican can show this parameter as the fuel tank level.
- Request
01 2F - Service 01
PID 2F - Module
7E0 → 7E8 - Every
1 s
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2022, 2025. Supported for 2021, 2023 to 2024, 2026.