Pelican
Get the app

Mitsubishi Triton

Control parameters

The Mitsubishi Triton has 4 control parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Brake pedal TRITON_CVT_BRAKEConfirmed

  • Request21 07
  • Service 21PID 07
  • Module7E1 → 7E9
  • Every250 ms
  • Testing for 1988 to 2017, 2019 to 2026

Example reply from a 2018 Mitsubishi Triton.

Bit 4 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2018. In testing for 1988 to 2017, 2019 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Absolute throttle position TPSAE J1979Confirmed

Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.

Pelican can show this parameter as the throttle position.

  • Request01 11
  • Service 01PID 11
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2018. Supported for 2010, 2013, 2015, 2019, 2022 to 2024.

Brake pedal TRITON_CVT_BRAKEConfirmed

  • Request21 07
  • Service 21PID 07
  • Module7E1 → 7E9
  • Every250 ms
  • Testing for 1988 to 2017, 2019 to 2026

Example reply from a 2018 Mitsubishi Triton.

Bit 4 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2018. In testing for 1988 to 2017, 2019 to 2026.

Brake switch TRITON_MPI_BRAKE_SWITCHConfirmed

  • Request21 1D
  • Service 21PID 1D
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1988 to 2017, 2019 to 2026

Example reply from a 2018 Mitsubishi Triton.

Bit 31 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2018. In testing for 1988 to 2017, 2019 to 2026.

Normal brake closed status TRITON_MPI_NORMAL_BRAKE_CLOSED_STSConfirmed

  • Request21 1D
  • Service 21PID 1D
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1988 to 2017, 2019 to 2026

Example reply from a 2018 Mitsubishi Triton.

Bit 30 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2018. In testing for 1988 to 2017, 2019 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.