Pelican
Get the app

Kia Cadenza

Battery parameters

The Kia Cadenza has 14 battery parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

12V battery state of charge CADENZA_BATTERY_SOCConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every2 s
  • Testing for 2010 to 2016, 2018 to 2020

Example reply from a 2017 Kia Cadenza.

Bits 48 to 55 of the reply, 8 bits.

0x3E = 62 → 62 %

Formula
val
Range
0 to 255 %
Unit
%

Confirmed for 2017. In testing for 2010 to 2016, 2018 to 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

12v battery charge CADENZA_VPWR_V3

  • Request22 E0 04
  • Service 22DID E004
  • Module7E2 → 7EA
  • Every10 s
  • Testing

Bits 152 to 159 of the reply, 8 bits.

Formula
val
Range
0 to 100 %
Unit
%

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

12V battery state of charge CADENZA_BATTERY_SOCConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every2 s
  • Testing for 2010 to 2016, 2018 to 2020

Example reply from a 2017 Kia Cadenza.

Bits 48 to 55 of the reply, 8 bits.

0x3E = 62 → 62 %

Formula
val
Range
0 to 255 %
Unit
%

Confirmed for 2017. In testing for 2010 to 2016, 2018 to 2020.

Battery current, battery sensor CADENZA_BAT_CURRENT_BATSENS

  • Request21 06
  • Service 21PID 06
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 736 to 751 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 16)
Range
-2048 to 2047.9375 A
Unit
A

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Battery state of charge, battery sensor CADENZA_BAT_ST_CHG_BATSENS

  • Request21 06
  • Service 21PID 06
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 784 to 791 of the reply, 8 bits.

Formula
(val × 20 ÷ 51)
Range
0 to 100 %
Unit
%

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Battery temperature, battery sensor CADENZA_BAT_T_BATSENS

  • Request21 06
  • Service 21PID 06
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 768 to 783 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val × 1953 ÷ 250000)
Range
-255.9836 to 255.9758 °C
Unit
°C

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Battery voltage CADENZA_BATTERY_VConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every2 s
  • Testing for 2010 to 2016, 2018 to 2020

Example reply from a 2017 Kia Cadenza.

Bits 32 to 39 of the reply, 8 bits.

0xAB = 171 → (171 × 17.37 ÷ 255) = 11.648118 V

Formula
(val × 17.37 ÷ 255)
Range
0 to 17.37 V
Unit
V

Confirmed for 2017. In testing for 2010 to 2016, 2018 to 2020.

Battery voltage after ignition CADENZA_BATTERY_V_AFTER_IGNITIONConfirmed

  • Request22 E0 01
  • Service 22DID E001
  • Module7E0 → 7E8
  • Every2 s
  • Testing for 2010 to 2016, 2018 to 2020

Example reply from a 2017 Kia Cadenza.

Bits 40 to 47 of the reply, 8 bits.

0xAB = 171 → (171 × 17.37 ÷ 255) = 11.648118 V

Formula
(val × 17.37 ÷ 255)
Range
0 to 17.37 V
Unit
V

Confirmed for 2017. In testing for 2010 to 2016, 2018 to 2020.

Battery voltage, battery sensor CADENZA_BAT_V_BATSENS

  • Request21 06
  • Service 21PID 06
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 752 to 767 of the reply, 16 bits. The bytes are in little-endian order.

Formula
(val × 32 ÷ 65535)
Range
0 to 32 V
Unit
V

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2017.

Relative accelerator pedal position voltage CADENZA_RELATIVE_ACCELERATOR_PEDAL_POSITION_VOLTAGE

  • Request21 14
  • Service 21PID 14
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 112 to 127 of the reply, 16 bits. The value is signed. The bytes are in little-endian order.

Formula
(val ÷ 5)
Range
-6553.6 to 6553.4 V
Unit
V

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Supply voltage CADENZA_SUPPLY_VOLTAGE

  • Request21 C0
  • Service 21PID C0
  • Module7E5
  • Every250 ms
  • Testing

Bits 64 to 71 of the reply, 8 bits.

Formula
(val ÷ 10)
Range
0 to 25.5 V
Unit
V

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

System voltage CADENZA_SYSTEM_VOLTAGE

  • Request21 C0
  • Service 21PID C0
  • Module7E5
  • Every250 ms
  • Testing

Bits 72 to 79 of the reply, 8 bits.

Formula
(val ÷ 10)
Range
0 to 25.5 V
Unit
V

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Throttle position sensor voltage #1 CADENZA_THROTTLE_POSITION_SENSOR_VOLTAGE__1

  • Request21 14
  • Service 21PID 14
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 360 to 375 of the reply, 16 bits. The bytes are in little-endian order.

Formula
(val × 0.0012207031)
Range
0 to 79 V
Unit
V

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Throttle position sensor voltage #2 CADENZA_THROTTLE_POSITION_SENSOR_VOLTAGE__2

  • Request21 14
  • Service 21PID 14
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 80 to 95 of the reply, 16 bits. The bytes are in little-endian order.

Formula
(val × 0.0012207031)
Range
0 to 79 V
Unit
V

In testing for 2010 to 2016, 2018 to 2020. Not supported for 2017.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.