Toyota Yaris iA

YARIS_IA_RO2 parameters

The Toyota Yaris iA has 1 YARIS_IA_RO2 parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Rear O2 voltage YARIS_IA_RO2_VConfirmed

  • Request22 03 5F
  • Service 22DID 035F
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2016 to 2017, 2019 to 2020

Example reply from a 2018 Toyota Yaris iA.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → (0 ÷ 1024) = 0 V

Formula
(val ÷ 1024)
Range
0 to 1 V
Unit
V

Confirmed for 2018. In testing for 2016 to 2017, 2019 to 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Rear O2 voltage YARIS_IA_RO2_VConfirmed

  • Request22 03 5F
  • Service 22DID 035F
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2016 to 2017, 2019 to 2020

Example reply from a 2018 Toyota Yaris iA.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → (0 ÷ 1024) = 0 V

Formula
(val ÷ 1024)
Range
0 to 1 V
Unit
V

Confirmed for 2018. In testing for 2016 to 2017, 2019 to 2020.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.