Pelican
Get the app

Toyota Yaris iA

YARIS_IA_CL parameters

The Toyota Yaris iA has 1 YARIS_IA_CL parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Closed loop lambda correction YARIS_IA_CL_LCConfirmed

  • Request22 03 BD
  • Service 22DID 03BD
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2016 to 2017, 2019 to 2020

Example reply from a 2018 Toyota Yaris iA.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0318 = 792 → (792 ÷ 8192) = 0.09668

Formula
(val ÷ 8192)
Range
-4 to 3.9
Unit
Number

Confirmed for 2018. In testing for 2016 to 2017, 2019 to 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Closed loop lambda correction YARIS_IA_CL_LCConfirmed

  • Request22 03 BD
  • Service 22DID 03BD
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2016 to 2017, 2019 to 2020

Example reply from a 2018 Toyota Yaris iA.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0318 = 792 → (792 ÷ 8192) = 0.09668

Formula
(val ÷ 8192)
Range
-4 to 3.9
Unit
Number

Confirmed for 2018. In testing for 2016 to 2017, 2019 to 2020.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.