Toyota Hilux

Electrical parameters

The Toyota Hilux has 2 electrical parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

B+ battery voltage HILUX_BATTERY_VOLTAGE_7C0

Pelican can show this parameter as the starter battery voltage.

  • Request22 10 21
  • Service 22DID 1021
  • Module7C0 → 7C8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10)
Range
0 to 20 V
Unit
V

In testing for 1988 to 2012, 2014 to 2017, 2019 to 2020, 2023, 2025 to 2026. Not supported for 2013, 2018, 2021 to 2022, 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

B+ battery voltage HILUX_BATTERY_VOLTAGE_7C0

Pelican can show this parameter as the starter battery voltage.

  • Request22 10 21
  • Service 22DID 1021
  • Module7C0 → 7C8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val ÷ 10)
Range
0 to 20 V
Unit
V

In testing for 1988 to 2012, 2014 to 2017, 2019 to 2020, 2023, 2025 to 2026. Not supported for 2013, 2018, 2021 to 2022, 2024.

Electric load feedback HILUX_ELEC_LOAD_FB

  • Request21 51
  • Service 21PID 51
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1988 to 2017, 2019 to 2026

Bits 200 to 215 of the reply, 16 bits.

Formula
(val × 10 ÷ 8192 − 40)
Range
-40 to 39.99
Unit
Number

In testing for 1988 to 2012, 2014 to 2017, 2019 to 2020, 2023, 2025 to 2026. Supported for 2018. Not supported for 2013, 2021 to 2022, 2024.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.