Pelican
Get the app

Toyota 4Runner

Cruise control parameters

The Toyota 4Runner has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Cruise control speed 4RUNNER_CC_SConfirmed

  • Request21 21
  • Service 21PID 21
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1988 to 2004, 2007 to 2010

Bits 8 to 15 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2005 to 2006, 2011 to 2018. In testing for 1988 to 2003, 2007 to 2009. Supported for 2019. Not supported for 2004, 2010, 2020 to 2021, 2023 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cruise control speed 4RUNNER_CC_SConfirmed

  • Request21 21
  • Service 21PID 21
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1988 to 2004, 2007 to 2010

Bits 8 to 15 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2005 to 2006, 2011 to 2018. In testing for 1988 to 2003, 2007 to 2009. Supported for 2019. Not supported for 2004, 2010, 2020 to 2021, 2023 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.