Pelican
Get the app

Seat Mii Electric

Connectable parameters

The Seat Mii Electric has 14 Connectables, parameters that Pelican can monitor automatically.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

HV battery charge MII_HVBAT_SOCConfirmed

Pelican can show this parameter as the state of charge.

  • Request22 02 8C
  • Service 22DID 028C
  • Module7E5 → 7ED
  • Every30 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 7 of the reply, 8 bits.

0xAF = 175 → (175 × 100 ÷ 255) = 68.627451 %

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2020. In testing for 2019, 2021.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

State of charge

HV battery charge MII_HVBAT_SOCConfirmed

Pelican can show this parameter as the state of charge.

  • Request22 02 8C
  • Service 22DID 028C
  • Module7E5 → 7ED
  • Every30 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 7 of the reply, 8 bits.

0xAF = 175 → (175 × 100 ÷ 255) = 68.627451 %

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2020. In testing for 2019, 2021.

HV battery charge, displayed MII_HVBAT_SOC_DISPConfirmed

Pelican can show this parameter as the state of charge.

  • Request22 11 64
  • Service 22DID 1164
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x1B73 = 7027 → (7027 ÷ 100) = 70.27 %

Formula
(val ÷ 100)
Range
0 to 100 %
Unit
%

Confirmed for 2020. In testing for 2019, 2021.

State of health

HV battery health MII_HVBAT_SOHConfirmed

Pelican can show this parameter as the state of health.

  • Request22 51 E0
  • Service 22DID 51E0
  • Module7E5 → 7ED
  • Every30 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x39EE = 14830 → (14830 × 0.127 − 1798.574) = 84.836 %

Formula
(val × 0.127 − 1798.574)
Range
-1798.574 to 100 %
Unit
%

Confirmed for 2020. In testing for 2019, 2021.

Speed

Vehicle speed MII_VSSConfirmed

Current vehicle speed.

Pelican can show this parameter as the speed.

  • Request22 F4 0D
  • Service 22DID F40D
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2020. In testing for 2019, 2021.

Electric range

Range remaining, displayed MII_RANGE_DSPConfirmed

Pelican can show this parameter as the electric range.

  • Request22 22 E0
  • Service 22DID 22E0
  • Module714 → 77E
  • Every1 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x00DC = 220 → 220 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2020. In testing for 2019, 2021.

Odometer

Odometer MII_ODO

Pelican can show this parameter as the odometer.

  • Request22 22 03
  • Service 22DID 2203
  • Module714 → 77E
  • Every10 s
  • Testing

Bits 0 to 23 of the reply, 24 bits.

Formula
val
Range
0 to 16777215 km
Unit
km

In testing for 2019, 2021. Not supported for 2020.

Distance since trouble codes were cleared

Distance traveled since diagnostic trouble codes cleared MII_CLR_DISTConfirmed

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request22 F4 31
  • Service 22DID F431
  • Module7E0 → 7E8
  • Every30 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x1371 = 4977 → 4,977 km

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2020. In testing for 2019, 2021.

Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed

Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request01 31
  • Service 01PID 31
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2020.

Engine speed

Drive motor speed, actual MII_MOTOR_RPM

Pelican can show this parameter as the engine speed.

  • Request22 3E 97
  • Service 22DID 3E97
  • Module7E6
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 4)
Range
0 to 16383.749 rpm
Unit
rpm

In testing for 2019 to 2021.

Starter battery voltage

Battery voltage MII_BAT_V

Pelican can show this parameter as the starter battery voltage.

  • Request22 10 5A
  • Service 22DID 105A
  • Module7E0
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 20)
Range
0 to 1310700 mV
Unit
mV

In testing for 2019 to 2021.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2020.

Terminal 30 voltage MII_KL30_VConfirmed

Pelican can show this parameter as the starter battery voltage.

  • Request22 F4 42
  • Service 22DID F442
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x3068 = 12392 → (12392 ÷ 1000) = 12.392 V

Formula
(val ÷ 1000)
Range
0 to 65 V
Unit
V

Confirmed for 2020. In testing for 2019, 2021.

Traction battery current

HV battery current MII_HVBAT_IConfirmed

Pelican can show this parameter as the traction battery current.

  • Request22 1E 3D
  • Service 22DID 1E3D
  • Module7E5 → 7ED
  • Every250 ms
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x0714 = 1812 → (1812 ÷ 4 − 511) = -58 A

Formula
(val ÷ 4 − 511)
Range
-200 to 200 A
Unit
A

Confirmed for 2020. In testing for 2019, 2021.

Traction battery voltage

HV battery voltage MII_HVBAT_VConfirmed

Pelican can show this parameter as the traction battery voltage.

  • Request22 1E 3B
  • Service 22DID 1E3B
  • Module7E5 → 7ED
  • Every1 s
  • Testing for 2019, 2021

Example reply from a 2020 Seat Mii Electric.

Bits 0 to 15 of the reply, 16 bits.

0x051C = 1308 → (1308 ÷ 4) = 327 V

Formula
(val ÷ 4)
Range
0 to 1000 V
Unit
V

Confirmed for 2020. In testing for 2019, 2021.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.