Volvo S90Light parametersThe Volvo S90 has 1 light parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardBrake light switch VOLVO_BRAKE_LIGHT_SWITCHRequest22 2B 00Service 22DID 2B00Module760Every250 msTestingBit 0 of the reply.FormulavalRange0 to 1UnitOff or onIn testing for 2016 to 2017, 2019 to 2024. Not supported for 2018.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Brake light switch VOLVO_BRAKE_LIGHT_SWITCHRequest22 2B 00Service 22DID 2B00Module760Every250 msTestingBit 0 of the reply.FormulavalRange0 to 1UnitOff or onIn testing for 2016 to 2017, 2019 to 2024. Not supported for 2018.
