Pelican
Get the app

Toyota Tacoma

Cruise control parameters

The Toyota Tacoma has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Cruise control speed TACOMA_CC_SConfirmed

  • Request21 21
  • Service 21PID 21
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1995 to 2011, 2015 to 2026

Example reply from a 2014 Toyota Tacoma.

Bits 8 to 15 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2012 to 2014. In testing for 1995 to 2011, 2015 to 2016, 2020, 2026. Not supported for 2017 to 2019, 2021 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cruise control speed TACOMA_CC_SConfirmed

  • Request21 21
  • Service 21PID 21
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 1995 to 2011, 2015 to 2026

Example reply from a 2014 Toyota Tacoma.

Bits 8 to 15 of the reply, 8 bits.

0x00 = 0 → 0 km/h

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2012 to 2014. In testing for 1995 to 2011, 2015 to 2016, 2020, 2026. Not supported for 2017 to 2019, 2021 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.