Pelican
Get the app

Toyota Camry Hybrid

Seatbelt parameters

The Toyota Camry Hybrid has 6 seatbelt parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Buckle switch, right side CAMRYH_BUCKLE_RSConfirmed

  • Request21 04
  • Service 21PID 04
  • Module780 → 788
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2018, 2020 to 2021, 2024 to 2026

Example reply from a 2023 Toyota Camry Hybrid.

Bits 24 to 31 of the reply, 8 bits.

0x01 = 1 → 1

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2019, 2022 to 2023. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Supported for 2012 to 2013. Not supported for 2007, 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Buckle switch, left side CAMRYH_BUCKLE_LS

  • Request21 04
  • Service 21PID 04
  • Module780 → 788
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2018, 2020 to 2021, 2024 to 2026

Bits 32 to 39 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Supported for 2012 to 2013, 2019, 2022 to 2023. Not supported for 2007, 2025.

Buckle switch, right side CAMRYH_BUCKLE_RSConfirmed

  • Request21 04
  • Service 21PID 04
  • Module780 → 788
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2018, 2020 to 2021, 2024 to 2026

Example reply from a 2023 Toyota Camry Hybrid.

Bits 24 to 31 of the reply, 8 bits.

0x01 = 1 → 1

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2019, 2022 to 2023. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Supported for 2012 to 2013. Not supported for 2007, 2025.

Reverse beep CAMRYH_REVERSE_BEEP

  • Request21 AC
  • Service 21PID AC
  • Module7C0 → 7C8
  • Every1 s
  • Testing

Bit 1 of the reply.

Formula
val
Range
0 to 1
Unit
On or off

In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2012 to 2013, 2019, 2022 to 2023, 2025.

Seat belt beep, driver CAMRYH_SEAT_BELT_BEEP_DRIVERConfirmed

  • Request21 A7
  • Service 21PID A7
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 0 of the reply.

0b1 = 1 → 1

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2019, 2022 to 2023, 2025.

Seat belt beep, passenger CAMRYH_SEAT_BELT_BEEP_PASSENGERConfirmed

  • Request21 A7
  • Service 21PID A7
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 1 of the reply.

0b1 = 1 → 1

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2019, 2022 to 2023, 2025.

Seat belt beep, reminder CAMRYH_SEAT_BELT_BEEP_REMINDERConfirmed

  • Request21 A7
  • Service 21PID A7
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 2 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2019, 2022 to 2023, 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.