Pelican
Get the app

Toyota Camry Hybrid

Light parameters

The Toyota Camry Hybrid has 9 light parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Check engine SW CAMRYH_CHECK_ENGINE_LIGHTConfirmed

  • Request21 12
  • Service 21PID 12
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2008 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 15 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007, 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2019, 2022 to 2023, 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Check engine SW CAMRYH_CHECK_ENGINE_LIGHTConfirmed

  • Request21 12
  • Service 21PID 12
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2008 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 15 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007, 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2019, 2022 to 2023, 2025.

Hazard switch history CAMRYH_HAZARD_SWITCH_HISTORYConfirmed

  • Request21 BC
  • Service 21PID BC
  • Module7B0 → 7B8
  • Every1 s
  • Testing for 2007 to 2018, 2020 to 2021, 2024 to 2026

Example reply from a 2023 Toyota Camry Hybrid.

Bit 2 of the reply.

0b0 = 0 → INCOMPLETE

Unit
Named states
States
Raw valueStateMeaning
0INCOMPLETEIncomplete
1COMPLETEComplete

Confirmed for 2019, 2022 to 2023. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2012 to 2013, 2025.

Oil pressure switch CAMRYH_EOP_LIGHTConfirmed

  • Request21 12
  • Service 21PID 12
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2008 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 35 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Supported for 2007. Not supported for 2019, 2022 to 2023, 2025.

P-seatbelt buckle SW CAMRYH_P_SEATBELT_BUCKLE_LIGHTConfirmed

  • Request21 12
  • Service 21PID 12
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2008 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 8 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007, 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2019, 2022 to 2023, 2025.

Rheostat CAMRYH_RHEOSTATConfirmed

Higher values are brighter

  • Request21 68
  • Service 21PID 68
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2008 to 2026

Example reply from a 2007 Toyota Camry Hybrid.

Bits 0 to 7 of the reply, 8 bits.

0x64 = 100 → 100

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2007. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2012 to 2013, 2019, 2022 to 2023, 2025.

Stop light CAMRYH_STOP_LIGHT_SWConfirmed

  • Request21 1F
  • Service 21PID 1F
  • Module7B0 → 7B8
  • Every1 s
  • Testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024 to 2026

Example reply from a 2023 Toyota Camry Hybrid.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007, 2012 to 2013, 2019, 2022 to 2023. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2025.

Stop light CAMRYH_STOP_LIGHT_SWITCHConfirmed

  • Request21 25
  • Service 21PID 25
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 5 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Number

Confirmed for 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2019, 2022 to 2023, 2025.

Stop light relay CAMRYH_STOP_LIGHT_RELAYConfirmed

  • Request21 3C
  • Service 21PID 3C
  • Module7B0 → 7B8
  • Every1 s
  • Testing for 2007 to 2011, 2014 to 2018, 2020 to 2021, 2024 to 2026

Example reply from a 2023 Toyota Camry Hybrid.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2012 to 2013, 2019, 2022 to 2023. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2007, 2025.

Tail cancel SW CAMRYH_TAIL_CANCEL_LIGHTConfirmed

  • Request21 12
  • Service 21PID 12
  • Module7C0 → 7C8
  • Every1 s
  • Testing for 2008 to 2011, 2014 to 2026

Example reply from a 2013 Toyota Camry Hybrid.

Bit 2 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007, 2012 to 2013. In testing for 2008 to 2011, 2014 to 2018, 2020 to 2021, 2024, 2026. Not supported for 2019, 2022 to 2023, 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.