Pelican
Get the app

Honda Ridgeline

Electrical parameters

The Honda Ridgeline has 2 electrical parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Brake pressure RIDGELINE_BRK_PConfirmed

  • Request22 40 05
  • Service 22DID 4005
  • ModuleDA28 → 28
  • Every1 s
  • Testing for 2006 to 2014, 2017 to 2018, 2020

Bits 56 to 71 of the reply, 16 bits.

Formula
(val − 25)
Range
0 to 120 bar
Unit
bar

Confirmed for 2019, 2021 to 2026. In testing for 2006 to 2014, 2017 to 2018, 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Brake pressure RIDGELINE_BRK_PConfirmed

  • Request22 40 05
  • Service 22DID 4005
  • ModuleDA28 → 28
  • Every1 s
  • Testing for 2006 to 2014, 2017 to 2018, 2020

Bits 56 to 71 of the reply, 16 bits.

Formula
(val − 25)
Range
0 to 120 bar
Unit
bar

Confirmed for 2019, 2021 to 2026. In testing for 2006 to 2014, 2017 to 2018, 2020.

Brake switch RIDGELINE_BRK_SWConfirmed

  • Request22 40 04
  • Service 22DID 4004
  • ModuleDA28 → 28
  • Every1 s
  • Testing for 2006 to 2014, 2017 to 2018, 2020

Bit 127 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2019, 2021 to 2026. In testing for 2006 to 2014, 2017 to 2018, 2020.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.