Pelican
Get the app

Ford Bronco

BRONCO_CL parameters

The Ford Bronco has 1 BRONCO_CL parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Closed loop lambda correction BRONCO_CL_LCConfirmed

  • Request22 03 BD
  • Service 22DID 03BD
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1988 to 1996, 2021, 2024 to 2025

Example reply from a 2026 Ford Bronco.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 ÷ 8192) = 0

Formula
(val ÷ 8192)
Range
-4 to 3.9
Unit
Number

Confirmed for 2022 to 2023, 2026. In testing for 1988 to 1996, 2021, 2024 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Closed loop lambda correction BRONCO_CL_LCConfirmed

  • Request22 03 BD
  • Service 22DID 03BD
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 1988 to 1996, 2021, 2024 to 2025

Example reply from a 2026 Ford Bronco.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 ÷ 8192) = 0

Formula
(val ÷ 8192)
Range
-4 to 3.9
Unit
Number

Confirmed for 2022 to 2023, 2026. In testing for 1988 to 1996, 2021, 2024 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.