Pelican
Get the app

Audi A7

Clock parameters

The Audi A7 has 2 clock parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Time since engine start A7_RUNTMConfirmed

How long it's been since the engine started.

  • Request22 F4 1F
  • Service 22DID F41F
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2010, 2013 to 2015, 2017 to 2019, 2021 to 2026

Example reply from a 2020 Audi A7.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → 0 s

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2011 to 2012, 2016, 2020. In testing for 2010, 2013 to 2015, 2017 to 2019, 2021 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Time since engine start A7_RUNTMConfirmed

How long it's been since the engine started.

  • Request22 F4 1F
  • Service 22DID F41F
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2010, 2013 to 2015, 2017 to 2019, 2021 to 2026

Example reply from a 2020 Audi A7.

Bits 0 to 15 of the reply, 16 bits.

0x0000 = 0 → 0 s

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2011 to 2012, 2016, 2020. In testing for 2010, 2013 to 2015, 2017 to 2019, 2021 to 2026.

Time since engine start RUNTMSAE J1979Confirmed

Increments while the engine is running. Freezes if the engine stalls. Resets to zero during every control module power-up and when entering the key-on, engine off position. Limited to 65,535 seconds and will not wrap around to zero.

  • Request01 1F
  • Service 01PID 1F
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2020. Supported for 2012, 2016, 2021.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.