Pelican
Get the app

Volvo S60

Movement parameters

The Volvo S60 has 2 movement parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Driven shaft speed S60_DRIVEN_SHFT_SPD

  • Request22 DA 38
  • Service 22DID DA38
  • ModuleD016 → 1EC64E80
  • Every250 ms
  • Testing for 2000 to 2019, 2021 to 2024

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

In testing for 2000 to 2014, 2016 to 2019, 2021 to 2024. Supported for 2020. Not supported for 2015.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Driven shaft speed S60_DRIVEN_SHFT_SPD

  • Request22 DA 38
  • Service 22DID DA38
  • ModuleD016 → 1EC64E80
  • Every250 ms
  • Testing for 2000 to 2019, 2021 to 2024

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

In testing for 2000 to 2014, 2016 to 2019, 2021 to 2024. Supported for 2020. Not supported for 2015.

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Request01 0D
  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2011, 2015, 2020, 2022 to 2024. Supported for 2014, 2019.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.