Pelican
Get the app

Toyota Tundra

Detail parameters

The Toyota Tundra has 1 detail parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Inspection mode TUNDRA_INSPECTION_MODEConfirmed

  • Request21 A6
  • Service 21PID A6
  • Module7B0 → 7B8
  • Every60 s
  • Testing for 1999 to 2006, 2009, 2012 to 2013, 2016, 2022 to 2026

Example reply from a 2021 Toyota Tundra.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007 to 2008, 2010 to 2011, 2014 to 2015, 2017 to 2021. In testing for 1999, 2001 to 2004, 2009, 2012 to 2013, 2016, 2022, 2026. Not supported for 2000, 2005 to 2006, 2023 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Inspection mode TUNDRA_INSPECTION_MODEConfirmed

  • Request21 A6
  • Service 21PID A6
  • Module7B0 → 7B8
  • Every60 s
  • Testing for 1999 to 2006, 2009, 2012 to 2013, 2016, 2022 to 2026

Example reply from a 2021 Toyota Tundra.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2007 to 2008, 2010 to 2011, 2014 to 2015, 2017 to 2021. In testing for 1999, 2001 to 2004, 2009, 2012 to 2013, 2016, 2022, 2026. Not supported for 2000, 2005 to 2006, 2023 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.