Pelican
Get the app

Toyota Prius

Fluid parameters

The Toyota Prius has 1 fluid parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance since oil change PRIUS_OIL_CHANGE_ODOConfirmed

  • Request21 41
  • Service 21PID 41
  • Module7C0 → 7C8
  • Every30 s
  • Testing for 1997 to 2012, 2014 to 2026

Example reply from a 2013 Toyota Prius.

Bits 0 to 7 of the reply, 8 bits.

0x36 = 54 → (54 × 2514600 ÷ 15625) = 8,690.4576 km

Formula
(val × 2514600 ÷ 15625)
Range
0 to 41038.272 km
Unit
km

Confirmed for 2013. In testing for 1997 to 2008, 2010 to 2012, 2014 to 2015, 2017 to 2023, 2026. Not supported for 2009, 2016, 2024 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance since oil change PRIUS_OIL_CHANGE_ODOConfirmed

  • Request21 41
  • Service 21PID 41
  • Module7C0 → 7C8
  • Every30 s
  • Testing for 1997 to 2012, 2014 to 2026

Example reply from a 2013 Toyota Prius.

Bits 0 to 7 of the reply, 8 bits.

0x36 = 54 → (54 × 2514600 ÷ 15625) = 8,690.4576 km

Formula
(val × 2514600 ÷ 15625)
Range
0 to 41038.272 km
Unit
km

Confirmed for 2013. In testing for 1997 to 2008, 2010 to 2012, 2014 to 2015, 2017 to 2023, 2026. Not supported for 2009, 2016, 2024 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.