Pelican
Get the app

Toyota Prius

Brake parameters

The Toyota Prius has 1 brake parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Master cylinder sensor temperature PRIUS_MASTER_CYL_TEMPConfirmed

  • Request22 10 06
  • Service 22DID 1006
  • Module7B0 → 7B8
  • Every5 s
  • Testing for 1997 to 2022

Example reply from a 2026 Toyota Prius.

Bits 0 to 7 of the reply, 8 bits.

0x63 = 99 → (99 − 80) = 19 °C

Formula
(val − 80)
Range
-20 to 100 °C
Unit
°C

Confirmed for 2023 to 2026. In testing for 1997 to 2000, 2002 to 2004, 2006, 2018. Not supported for 2001, 2005, 2007 to 2017, 2019 to 2022.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Master cylinder sensor temperature PRIUS_MASTER_CYL_TEMPConfirmed

  • Request22 10 06
  • Service 22DID 1006
  • Module7B0 → 7B8
  • Every5 s
  • Testing for 1997 to 2022

Example reply from a 2026 Toyota Prius.

Bits 0 to 7 of the reply, 8 bits.

0x63 = 99 → (99 − 80) = 19 °C

Formula
(val − 80)
Range
-20 to 100 °C
Unit
°C

Confirmed for 2023 to 2026. In testing for 1997 to 2000, 2002 to 2004, 2006, 2018. Not supported for 2001, 2005, 2007 to 2017, 2019 to 2022.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.