Toyota bZ4X

Brake parameters

The Toyota bZ4X has 2 brake parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Master cylinder sensor temperature BZ4X_MASTER_CYL_TEMPConfirmed

  • Request22 10 06
  • Service 22DID 1006
  • Module7B0 → 7B8
  • Every5 s
  • Testing for 2022, 2024 to 2026

Example reply from a 2023 Toyota bZ4X.

Bits 0 to 7 of the reply, 8 bits.

0x57 = 87 → (87 − 80) = 7 °C

Formula
(val − 80)
Range
-20 to 100 °C
Unit
°C

Confirmed for 2023. In testing for 2022, 2024 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Master cylinder sensor temperature BZ4X_MASTER_CYL_TEMPConfirmed

  • Request22 10 06
  • Service 22DID 1006
  • Module7B0 → 7B8
  • Every5 s
  • Testing for 2022, 2024 to 2026

Example reply from a 2023 Toyota bZ4X.

Bits 0 to 7 of the reply, 8 bits.

0x57 = 87 → (87 − 80) = 7 °C

Formula
(val − 80)
Range
-20 to 100 °C
Unit
°C

Confirmed for 2023. In testing for 2022, 2024 to 2026.

Parking brake actuator status BZ4X_EPBConfirmed

  • Request22 10 45
  • Service 22DID 1045
  • Module7B0 → 7B8
  • Every5 s
  • Testing for 2022, 2024 to 2026

Example reply from a 2023 Toyota bZ4X.

Bits 0 to 7 of the reply, 8 bits.

0x00 = 0 → APPLIED

Unit
Named states
States
Raw valueStateMeaning
0APPLIEDApplied

Confirmed for 2023. In testing for 2022, 2024 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.