Pelican
Get the app

Lincoln MKX

LINCOLN_TIP parameters

The Lincoln MKX has 2 LINCOLN_TIP parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Throttle inlet pressure absolute LINCOLN_TIP_ABS

  • Request22 03 3E
  • Service 22DID 033E
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0011064263)
Range
0 to 60 psi
Unit
psi

In testing for 2007 to 2012, 2014 to 2015, 2017 to 2018. Not supported for 2013, 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Throttle inlet pressure absolute LINCOLN_TIP_ABS

  • Request22 03 3E
  • Service 22DID 033E
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0011064263)
Range
0 to 60 psi
Unit
psi

In testing for 2007 to 2012, 2014 to 2015, 2017 to 2018. Not supported for 2013, 2016.

Throttle inlet pressure sensor voltage LINCOLN_TIP_V

  • Request22 03 3C
  • Service 22DID 033C
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0048828125)
Range
0 to 5 V
Unit
V

In testing for 2007 to 2012, 2014 to 2015, 2017 to 2018. Not supported for 2013, 2016.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.