Pelican
Get the app

Lincoln MKX

Cruise control parameters

The Lincoln MKX has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Target vehicle speed LINCOLN_CC_TGT_VSSConfirmed

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every250 ms
  • Testing

Example reply from a 2013 Lincoln MKX.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 × 3.6 ÷ 10) = 0 km/h

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

Confirmed for 2013. In testing for 2007 to 2012, 2014 to 2015, 2017 to 2018. Not supported for 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Target vehicle speed LINCOLN_CC_TGT_VSSConfirmed

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every250 ms
  • Testing

Example reply from a 2013 Lincoln MKX.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

0x0000 = 0 → (0 × 3.6 ÷ 10) = 0 km/h

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

Confirmed for 2013. In testing for 2007 to 2012, 2014 to 2015, 2017 to 2018. Not supported for 2016.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.