Pelican
Get the app

Lexus RX 330

Stat parameters

The Lexus RX 330 has 1 stat parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Ready-on time, total LEXUS_READY_HOURS

  • Request22 15 E8
  • Service 22DID 15E8
  • Module7D2 → 7DA
  • Every60 s
  • Testing

Bits 80 to 95 of the reply, 16 bits.

Formula
val
Range
0 to 65535 h
Unit
h

In testing for 2002, 2005 to 2006, 2008, 2010, 2013, 2015 to 2017, 2020, 2022 to 2023, 2025 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Ready-on time, total LEXUS_READY_HOURS

  • Request22 15 E8
  • Service 22DID 15E8
  • Module7D2 → 7DA
  • Every60 s
  • Testing

Bits 80 to 95 of the reply, 16 bits.

Formula
val
Range
0 to 65535 h
Unit
h

In testing for 2002, 2005 to 2006, 2008, 2010, 2013, 2015 to 2017, 2020, 2022 to 2023, 2025 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.