Pelican
Get the app

Lexus ES 300h

Light parameters

The Lexus ES 300h has 6 light parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Hazard switch history LEXUS_HAZARD_SWITCH_HISTORYConfirmed

  • Request21 BC
  • Service 21PID BC
  • Module7B0
  • Every30 s
  • Testing

Example reply from a 2013 Lexus ES 300h.

Bit 2 of the reply.

0b1 = 1 → COMPLETE

Unit
Named states
States
Raw valueStateMeaning
0INCOMPLETEIncomplete
1COMPLETEComplete

Confirmed for 2013. In testing for 2012, 2014 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Hazard switch history LEXUS_HAZARD_SWITCH_HISTORYConfirmed

  • Request21 BC
  • Service 21PID BC
  • Module7B0
  • Every30 s
  • Testing

Example reply from a 2013 Lexus ES 300h.

Bit 2 of the reply.

0b1 = 1 → COMPLETE

Unit
Named states
States
Raw valueStateMeaning
0INCOMPLETEIncomplete
1COMPLETEComplete

Confirmed for 2013. In testing for 2012, 2014 to 2026.

Oil pressure switch LEXUS_EOP_LIGHTConfirmed

  • Request21 12
  • Service 21PID 12
  • Module7C0 → 7C8
  • Every1 s
  • Testing

Example reply from a 2013 Lexus ES 300h.

Bit 35 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2013. In testing for 2012, 2014 to 2026.

Rheostat LEXUS_RHEOSTAT

Higher values are brighter

  • Request21 68
  • Service 21PID 68
  • Module7C0 → 7C8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2012 to 2026.

Stop light LEXUS_STOP_LIGHT_SWConfirmed

  • Request21 1F
  • Service 21PID 1F
  • Module7B0 → 7B8
  • Every2 s
  • Testing

Example reply from a 2013 Lexus ES 300h.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2013. In testing for 2012, 2014 to 2026.

Stop light LEXUS_STOP_LIGHT_SWITCHConfirmed

  • Request21 25
  • Service 21PID 25
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Example reply from a 2013 Lexus ES 300h.

Bit 5 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Number

Confirmed for 2013. In testing for 2012, 2014 to 2026.

Stop light relay LEXUS_STOP_LIGHT_RELAYConfirmed

  • Request21 3C
  • Service 21PID 3C
  • Module7B0 → 7B8
  • Every1 s
  • Testing

Example reply from a 2013 Lexus ES 300h.

Bit 0 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2013. In testing for 2012, 2014 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.