Pelican
Get the app

Kia Telluride

Battery parameters

The Kia Telluride has 2 battery parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

12v battery charge TELLURIDE_VPWR_V3Confirmed

  • Request22 E0 04
  • Service 22DID E004
  • Module7E2
  • Every1 s
  • Testing for 2022, 2024, 2026

Bits 152 to 159 of the reply, 8 bits.

Formula
val
Range
0 to 100 %
Unit
%

Confirmed for 2020 to 2021, 2023, 2025. In testing for 2022, 2026. Not supported for 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

12v battery charge TELLURIDE_VPWR_V3Confirmed

  • Request22 E0 04
  • Service 22DID E004
  • Module7E2
  • Every1 s
  • Testing for 2022, 2024, 2026

Bits 152 to 159 of the reply, 8 bits.

Formula
val
Range
0 to 100 %
Unit
%

Confirmed for 2020 to 2021, 2023, 2025. In testing for 2022, 2026. Not supported for 2024.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2020, 2023, 2025. Supported for 2021.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.