Jeep Cherokee

Trip parameters

The Jeep Cherokee has 3 trip parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Odometer CHEROKEE_ODO

  • Request22 03 BC
  • Service 22DID 03BC
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Bits 0 to 31 of the reply, 32 bits.

Formula
(val ÷ 1000)
Range
0 to 4294967 km
Unit
km

In testing for 1988 to 2013. Not supported for 2014, 2023.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Odometer CHEROKEE_ODO

  • Request22 03 BC
  • Service 22DID 03BC
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Bits 0 to 31 of the reply, 32 bits.

Formula
(val ÷ 1000)
Range
0 to 4294967 km
Unit
km

In testing for 1988 to 2013. Not supported for 2014, 2023.

Odometer ODOSAE J1979Confirmed

Pelican can show this parameter as the odometer.

  • Request01 A6
  • Service 01PID A6
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 31 of the reply, 32 bits.

Formula
(val ÷ 10)
Range
0 to 429496729.5 km
Unit
km

Confirmed for 2020, 2023.

Odometer, engine computer CHEROKEE_PCM_ODO

  • Request22 04 3B
  • Service 22DID 043B
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 1024 ÷ 125)
Range
0 to 536862 mi
Unit
mi

In testing for 1988 to 1995, 1997, 1999 to 2013. Not supported for 1996, 1998, 2014, 2016, 2019, 2023.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.