Pelican
Get the app

Hyundai Santa Fe

Climate parameters

The Hyundai Santa Fe has 4 climate parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Defogging? SANTAFE_DEFOG_SWConfirmed

  • Request22 BC 03
  • Service 22DID BC03
  • Module770 → 778
  • Every1 s
  • Testing for 2000 to 2018, 2021, 2023, 2025 to 2026

Example reply from a 2022 Hyundai Santa Fe.

Bit 62 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2019 to 2020, 2022. In testing for 2015 to 2017, 2021, 2025 to 2026. Supported for 2024. Not supported for 2011, 2013 to 2014, 2018, 2023.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Ambient air temperature AATSAE J1979Confirmed

  • Request01 46
  • Service 01PID 46
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 7 of the reply, 8 bits.

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2019 to 2020, 2024. Supported for 2013, 2025.

Defogging? SANTAFE_DEFOG_SWConfirmed

  • Request22 BC 03
  • Service 22DID BC03
  • Module770 → 778
  • Every1 s
  • Testing for 2000 to 2018, 2021, 2023, 2025 to 2026

Example reply from a 2022 Hyundai Santa Fe.

Bit 62 of the reply.

0b0 = 0 → 0

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2019 to 2020, 2022. In testing for 2015 to 2017, 2021, 2025 to 2026. Supported for 2024. Not supported for 2011, 2013 to 2014, 2018, 2023.

Interior temperature, passenger legs vent SANTAFE_HVAC_IAT_PASSENGER_LEGS_VENTConfirmed

  • Request22 01 01
  • Service 22DID 0101
  • Module7B3 → 7BB
  • Every5 s
  • Testing for 2000 to 2023, 2025 to 2026

Example reply from a 2024 Hyundai Santa Fe.

Bits 72 to 79 of the reply, 8 bits.

0xFF = 255 → (255 ÷ 2 − 40) = 87.5 °C

Formula
(val ÷ 2 − 40)
Range
-40 to 87.5 °C
Unit
°C

Confirmed for 2024. In testing for 2000 to 2010, 2012, 2014 to 2018, 2020 to 2023, 2025 to 2026. Not supported for 2011, 2013, 2019.

Interior temperature, passenger vent SANTAFE_HVAC_IAT_PASSENGER_VENTConfirmed

  • Request22 01 01
  • Service 22DID 0101
  • Module7B3 → 7BB
  • Every5 s
  • Testing for 2000 to 2023, 2025 to 2026

Example reply from a 2024 Hyundai Santa Fe.

Bits 64 to 71 of the reply, 8 bits.

0xFF = 255 → (255 ÷ 2 − 40) = 87.5 °C

Formula
(val ÷ 2 − 40)
Range
-40 to 87.5 °C
Unit
°C

Confirmed for 2024. In testing for 2000 to 2010, 2012, 2014 to 2018, 2020 to 2023, 2025 to 2026. Not supported for 2011, 2013, 2019.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.