Pelican
Get the app

Haval Jolion

Drivetrain parameters

The Haval Jolion has 2 drivetrain parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Engine net torque JOLION_TRANSMISSION_ENGINE_NET_TORQUE

  • Request22 69 15
  • Service 22DID 6915
  • Module7E1
  • Every1 s
  • Testing

Bits 8 to 23 of the reply, 16 bits.

Formula
(val − 510)
Range
-510 to 65025 N·m
Unit
N·m

In testing for 2021 to 2023, 2025 to 2026. Not supported for 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Engine net torque JOLION_TRANSMISSION_ENGINE_NET_TORQUE

  • Request22 69 15
  • Service 22DID 6915
  • Module7E1
  • Every1 s
  • Testing

Bits 8 to 23 of the reply, 16 bits.

Formula
(val − 510)
Range
-510 to 65025 N·m
Unit
N·m

In testing for 2021 to 2023, 2025 to 2026. Not supported for 2024.

Engine torque JOLION_TRANSMISSION_ENGINE_TORQUE

  • Request22 69 15
  • Service 22DID 6915
  • Module7E1
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits. The value is signed.

Formula
(val × 4)
Range
-512 to 508 N·m
Unit
N·m

In testing for 2021 to 2023, 2025 to 2026. Not supported for 2024.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.