Pelican
Get the app

Ford Transit Connect

Connectable parameters

The Ford Transit Connect has 15 Connectables, parameters that Pelican can monitor automatically.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Front left tire pressure TRANSITC_TP_FLConfirmed

Pelican can show this parameter as the front left tire pressure.

  • Request22 28 13
  • Service 22DID 2813
  • Module726 → 72E
  • Every5 s
  • Testing for 2002 to 2019, 2021 to 2025

Example reply from a 2026 Ford Transit Connect.

Bits 0 to 15 of the reply, 16 bits.

0x02CE = 718 → (718 ÷ 20) = 35.9 psi

Formula
(val ÷ 20)
Range
0 to 3276 psi
Unit
psi

Confirmed for 2020, 2026. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2012 to 2013.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Fuel tank level

Fuel tank level FLISAE J1979Confirmed

Pelican can show this parameter as the fuel tank level.

  • Request01 2F
  • Service 01PID 2F
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2012 to 2013. Supported for 2018, 2020.

Speed

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Request01 0D
  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2012 to 2013. Supported for 2018, 2020, 2026.

Front left tire pressure

Front left tire pressure TRANSITC_TP_FLConfirmed

Pelican can show this parameter as the front left tire pressure.

  • Request22 28 13
  • Service 22DID 2813
  • Module726 → 72E
  • Every5 s
  • Testing for 2002 to 2019, 2021 to 2025

Example reply from a 2026 Ford Transit Connect.

Bits 0 to 15 of the reply, 16 bits.

0x02CE = 718 → (718 ÷ 20) = 35.9 psi

Formula
(val ÷ 20)
Range
0 to 3276 psi
Unit
psi

Confirmed for 2020, 2026. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2012 to 2013.

Front right tire pressure

Front right tire pressure TRANSITC_TP_FRConfirmed

Pelican can show this parameter as the front right tire pressure.

  • Request22 28 14
  • Service 22DID 2814
  • Module726 → 72E
  • Every5 s
  • Testing for 2002 to 2019, 2021 to 2025

Example reply from a 2026 Ford Transit Connect.

Bits 0 to 15 of the reply, 16 bits.

0x02BF = 703 → (703 ÷ 20) = 35.15 psi

Formula
(val ÷ 20)
Range
0 to 3276 psi
Unit
psi

Confirmed for 2020, 2026. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2012 to 2013.

Rear left tire pressure

Rear left outer tire pressure TRANSITC_TP_RLConfirmed

Pelican can show this parameter as the rear left tire pressure.

  • Request22 28 16
  • Service 22DID 2816
  • Module726 → 72E
  • Every5 s
  • Testing for 2002 to 2019, 2021 to 2025

Example reply from a 2026 Ford Transit Connect.

Bits 0 to 15 of the reply, 16 bits.

0x0300 = 768 → (768 ÷ 20) = 38.4 psi

Formula
(val ÷ 20)
Range
0 to 3276 psi
Unit
psi

Confirmed for 2020, 2026. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2012 to 2013.

Rear right tire pressure

Rear right outer tire pressure TRANSITC_TP_RRConfirmed

Pelican can show this parameter as the rear right tire pressure.

  • Request22 28 15
  • Service 22DID 2815
  • Module726 → 72E
  • Every5 s
  • Testing for 2002 to 2019, 2021 to 2025

Example reply from a 2026 Ford Transit Connect.

Bits 0 to 15 of the reply, 16 bits.

0x0300 = 768 → (768 ÷ 20) = 38.4 psi

Formula
(val ÷ 20)
Range
0 to 3276 psi
Unit
psi

Confirmed for 2020, 2026. In testing for 2002 to 2011, 2014 to 2019, 2021 to 2025. Not supported for 2012 to 2013.

CheckEngineLightOn

Malfunction indicator lamp MILSAE J1979Confirmed

The MIL status is OFF during key-on, engine-off bulb check unless MIL has also been commanded ON for a detected malfunction. The status reflects whether there are confirmed DTC(s) stored that are illuminating the MIL. It should not reflect the status of the MIL, which could be on for a function check, flashing I/M readiness or flashing for misfire.

Pelican can show this parameter as the checkEngineLightOn.

  • Request01 01
  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 0 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2012 to 2013. Supported for 2018, 2020, 2026.

Commanded lambda

Commanded equivalence ratio EQ_RATSAE J1979Confirmed

Fuel systems that utilize conventional oxygen sensor display the inverse of the commanded open loop equivalence ratio (also known as lambda) while the fuel control system is in open loop. Will indicate 1.000 while in closed-loop fuel.

Pelican can show this parameter as the commanded lambda.

  • Request01 44
  • Service 01PID 44
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 2 ÷ 65535)
Range
0 to 1.99
Unit
Number

Confirmed for 2012 to 2013. Supported for 2018, 2020.

Distance since trouble codes were cleared

Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed

Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Request01 31
  • Service 01PID 31
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2012 to 2013. Supported for 2018, 2020, 2026.

Engine coolant temperature

Engine coolant temperature ECTSAE J1979Confirmed

Your engine temperature must operate within a certain temperature range to operate efficiently and safely. If it runs too hot, then your engine could be permanently damaged. If it runs too cold, then your engine will use more fuel than necessary.

Pelican can show this parameter as the engine coolant temperature.

  • Request01 05
  • Service 01PID 05
  • Module7E0 → 7E8
  • Every500 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

Confirmed for 2012 to 2013. Supported for 2018, 2020, 2026.

Engine load

Calculated engine load LOAD_PCTSAE J1979Confirmed

Represents the amount of work the engine is doing. Expected to reach 100% at wide open throttle/wide open pedal at any altitude, temperature or rpm for both naturally aspirated and boosted engines. If engine load is limited for powertrain protection e.g. engine/turbocharger protection, this value may not reach 100%. For hybrid vehicles, indicates the torque produced only by the internal combustion engine, not the torque being delivered by the entire powertrain. For electric vehicles, the meaning of this parameter is undefined.

Pelican can show this parameter as the engine load.

  • Request01 04
  • Service 01PID 04
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 255)
Range
0 to 100 %
Unit
%

Confirmed for 2012 to 2013. Supported for 2018, 2020.

Mass air flow

Air flow rate from mass air flow sensor MAFSAE J1979Confirmed

Pelican can show this parameter as the mass air flow.

  • Request01 10
  • Service 01PID 10
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 100)
Range
0 to 655.35 g/s
Unit
g/s

Confirmed for 2012 to 2013. Supported for 2018, 2020.

Short term fuel trim

Short term fuel trim (bank 1) SHRTFT1SAE J1979Confirmed

Correction being used by the closed-loop fuel algorithm.

Pelican can show this parameter as the short term fuel trim.

  • Request01 06
  • Service 01PID 06
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 100 ÷ 128 − 100)
Range
-100 to 99.2 %
Unit
%

Confirmed for 2012 to 2013. Supported for 2018, 2020.

Starter battery voltage

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Request01 42
  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
(val ÷ 1000)
Range
0 to 65535 V
Unit
V

Confirmed for 2012 to 2013. Supported for 2018, 2020, 2026.

StoredDTCCount

Number of DTCs stored in this ECU DTC_CNTSAE J1979Confirmed

Number of confirmed emission-related DTCs stored in the ECU available for display using Service $03.

Pelican can show this parameter as the storedDTCCount.

  • Request01 01
  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bits 1 to 7 of the reply, 7 bits.

Formula
val
Range
0 to 127
Unit
Number

Confirmed for 2012 to 2013. Supported for 2018, 2020, 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.