Ford Territory

Cruise control parameters

The Ford Territory has 1 cruise control parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Target vehicle speed FORD_CC_TGT_VSS

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

In testing for 2004 to 2011, 2013, 2015 to 2016, 2018 to 2022, 2025 to 2026. Not supported for 2012, 2014, 2023 to 2024.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Target vehicle speed FORD_CC_TGT_VSS

The speed of the vehicle ahead of you.

  • Request22 A2 24
  • Service 22DID A224
  • Module764 → 76C
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val × 3.6 ÷ 10)
Range
-736 to 736 km/h
Unit
km/h

In testing for 2004 to 2011, 2013, 2015 to 2016, 2018 to 2022, 2025 to 2026. Not supported for 2012, 2014, 2023 to 2024.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.