BMW M2

Electrical parameters

The BMW M2 has 3 electrical parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

12V battery current BMW_12V_A

  • Request22 40 2B
  • Service 22DID 402B
  • Module6F1 → 612
  • Every10 s
  • Testing

Bits 32 to 47 of the reply, 16 bits.

Formula
(val ÷ 12.5 − 200)
Range
-200 to 5042.8 A
Unit
A

In testing for 2016 to 2021, 2023 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

12V battery current BMW_12V_A

  • Request22 40 2B
  • Service 22DID 402B
  • Module6F1 → 612
  • Every10 s
  • Testing

Bits 32 to 47 of the reply, 16 bits.

Formula
(val ÷ 12.5 − 200)
Range
-200 to 5042.8 A
Unit
A

In testing for 2016 to 2021, 2023 to 2026.

12V battery temperature BMW_12V_T

  • Request22 40 2B
  • Service 22DID 402B
  • Module6F1 → 612
  • Every10 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 10)
Range
-3276.8 to 3276.7 °C
Unit
°C

In testing for 2016 to 2021, 2023 to 2026.

12V battery voltage BMW_12V_V

Pelican can show this parameter as the starter battery voltage.

  • Request22 40 2B
  • Service 22DID 402B
  • Module6F1 → 612
  • Every10 s
  • Testing

Bits 16 to 31 of the reply, 16 bits.

Formula
(val ÷ 4000 + 6)
Range
6 to 22.3837 V
Unit
V

In testing for 2016 to 2021, 2023 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.