Control parameters
The BMW 5 Series has 4 control parameters.
● Confirmed◆ In testing○ Supported× Not supported
Absolute throttle position TPSAE J1979Confirmed
Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.
Pelican can show this parameter as the throttle position.
- Request
01 11 - Service 01
PID 11 - Module
7E0 → 7E8 - Every
250 ms
Bits 0 to 7 of the reply, 8 bits.
- Formula
(val × 100 ÷ 255)- Range
- 0 to 100 %
- Unit
- %
Confirmed for 2009, 2011, 2013, 2015, 2021. Supported for 2004, 2008, 2010, 2012, 2014, 2016 to 2020, 2022 to 2023.
Brake pressure 5SERIES_BRAKE_PConfirmed
- Request
22 DB E5 - Service 22
DID DBE5 - Module
6F1 → 629 - Every
250 ms - Testing for 1988 to 2013, 2015 to 2016, 2018 to 2019, 2022 to 2026
Example reply from a 2021 BMW 5 Series.
Bits 0 to 15 of the reply, 16 bits. The value is signed.
0x0000 = 0 → (0 ÷ 10) = 0 bar
- Formula
(val ÷ 10)- Range
- -3276 to 3276 bar
- Unit
- bar
Confirmed for 2014, 2017, 2020 to 2021. In testing for 2011 to 2013, 2015 to 2016, 2018 to 2019, 2022 to 2026.
Brake switch 5SERIES_BRAKE_SWITCHConfirmed
- Request
22 DA 28 - Service 22
DID DA28 - Module
6F1 → 618 - Every
1 s - Testing for 1988 to 2010, 2024 to 2026
Example reply from a 2023 BMW 5 Series.
Bits 8 to 15 of the reply, 8 bits.
0x00 = 0 → 0
- Formula
val- Range
- 0 to 1
- Unit
- Number
Confirmed for 2011 to 2023. In testing for 2007 to 2008, 2010, 2024 to 2026. Not supported for 1998, 2003 to 2006, 2009.
Parking brake applied 5SERIES_PARK_BRAKE
- Request
22 D1 30 - Service 22
DID D130 - Module
6F1 → 640 - Every
5 s - Testing
Bits 0 to 7 of the reply, 8 bits.
- Formula
val- Range
- 0 to 1
- Unit
- Off or on
In testing for 2011 to 2013, 2015 to 2016, 2018 to 2019, 2022 to 2026. Not supported for 2014, 2017, 2020 to 2021.
