Acura TL

Clock parameters

The Acura TL has 3 clock parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Time since engine start ACURA_RUNTM

How long it's been since the engine started.

  • Request22 26 60
  • Service 22DID 2660
  • ModuleDA10 → 10
  • Every5 s
  • Testing

Bits 368 to 383 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

In testing for 1996 to 2006, 2008 to 2011, 2013 to 2014. Not supported for 2007, 2012.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Time since engine start ACURA_RUNTM

How long it's been since the engine started.

  • Request22 26 60
  • Service 22DID 2660
  • ModuleDA10 → 10
  • Every5 s
  • Testing

Bits 368 to 383 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

In testing for 1996 to 2006, 2008 to 2011, 2013 to 2014. Not supported for 2007, 2012.

Time since engine start ACURA_RUNTM_PCM

How long it's been since the engine started.

  • Request22 26 60
  • Service 22DID 2660
  • ModuleDA0E → 0E
  • Every30 s
  • Testing

Bits 368 to 383 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

In testing for 1996 to 2014.

Time since engine start ACURA_RUNTM_V2

How long it's been since the engine started.

  • Request22 26 60
  • Service 22DID 2660
  • ModuleDA11 → 11
  • Every5 s
  • Testing

Bits 368 to 383 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

In testing for 1996 to 2006, 2008 to 2011, 2013 to 2014. Not supported for 2007, 2012.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.