Pelican
Get the app

Vauxhall/Opel Ampera

GPS parameters

The Vauxhall/Opel Ampera has 3 GPS parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Heading VAUXHALLOPEL_GPS_HEADING

  • Request22 28 02
  • Service 22DID 2802
  • Module7AB → 52B
  • Every1 s
  • Testing

Bits 152 to 167 of the reply, 16 bits.

Formula
val
Range
0 to 65535 °
Unit
°

In testing for 2011 to 2015, 2017 to 2019.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Heading VAUXHALLOPEL_GPS_HEADING

  • Request22 28 02
  • Service 22DID 2802
  • Module7AB → 52B
  • Every1 s
  • Testing

Bits 152 to 167 of the reply, 16 bits.

Formula
val
Range
0 to 65535 °
Unit
°

In testing for 2011 to 2015, 2017 to 2019.

Satellites, tracked VAUXHALLOPEL_GPS_SATS_TRACKED

  • Request22 28 02
  • Service 22DID 2802
  • Module7AB → 52B
  • Every1 s
  • Testing

Bits 200 to 203 of the reply, 4 bits.

Formula
val
Range
0 to 15
Unit
Number

In testing for 2011 to 2015, 2017 to 2019.

Satellites, visible VAUXHALLOPEL_GPS_SATS_VISIBLE

  • Request22 28 02
  • Service 22DID 2802
  • Module7AB → 52B
  • Every1 s
  • Testing

Bits 204 to 207 of the reply, 4 bits.

Formula
val
Range
0 to 15
Unit
Number

In testing for 2011 to 2015, 2017 to 2019.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.