Toyota Prius v

Fluid parameters

The Toyota Prius v has 1 fluid parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance since oil change TOYOTA_OIL_CHANGE_ODOConfirmed

  • Request21 41
  • Service 21PID 41
  • Module7C0 → 7C8
  • Every30 s
  • Testing

Example reply from a 2015 Toyota Prius v.

Bits 0 to 7 of the reply, 8 bits.

0x09 = 9 → (9 × 2514600 ÷ 15625) = 1,448.4096 km

Formula
(val × 2514600 ÷ 15625)
Range
0 to 41038.272 km
Unit
km

Confirmed for 2014 to 2015. In testing for 2011 to 2013, 2016 to 2017.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Distance since oil change TOYOTA_OIL_CHANGE_ODOConfirmed

  • Request21 41
  • Service 21PID 41
  • Module7C0 → 7C8
  • Every30 s
  • Testing

Example reply from a 2015 Toyota Prius v.

Bits 0 to 7 of the reply, 8 bits.

0x09 = 9 → (9 × 2514600 ÷ 15625) = 1,448.4096 km

Formula
(val × 2514600 ÷ 15625)
Range
0 to 41038.272 km
Unit
km

Confirmed for 2014 to 2015. In testing for 2011 to 2013, 2016 to 2017.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.