Toyota GR Corolla

Drivetrain parameters

The Toyota GR Corolla has 1 drivetrain parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Coupling temperature GRCOROLLA_COUPLING_TEMPConfirmed

  • Request22 10 26
  • Service 22DID 1026
  • Module7B1 → 7B9
  • Every1 s
  • Testing for 2022

Example reply from a 2026 Toyota GR Corolla.

Bits 0 to 15 of the reply, 16 bits.

0x03F6 = 1014 → (1014 ÷ 128) = 7.921875 °C

Formula
(val ÷ 128)
Range
0 to 100 °C
Unit
°C

Confirmed for 2023 to 2026. In testing for 2022.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Coupling temperature GRCOROLLA_COUPLING_TEMPConfirmed

  • Request22 10 26
  • Service 22DID 1026
  • Module7B1 → 7B9
  • Every1 s
  • Testing for 2022

Example reply from a 2026 Toyota GR Corolla.

Bits 0 to 15 of the reply, 16 bits.

0x03F6 = 1014 → (1014 ÷ 128) = 7.921875 °C

Formula
(val ÷ 128)
Range
0 to 100 °C
Unit
°C

Confirmed for 2023 to 2026. In testing for 2022.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.