Pelican
Get the app

Peugeot 207

Orientation parameters

The Peugeot 207 has 2 orientation parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Lateral acceleration PEUGEOT_LAT_G

  • Request22 29 62
  • Service 22DID 2962
  • ModuleDA30 → 30
  • Every100 ms
  • Testing

Bits 4 to 15 of the reply, 12 bits.

Formula
(val ÷ 50 − 40.96)
Range
-40.94 to 40.94 m/s²
Unit
m/s²

In testing for 2006 to 2008, 2010 to 2014. Not supported for 2009.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Lateral acceleration PEUGEOT_LAT_G

  • Request22 29 62
  • Service 22DID 2962
  • ModuleDA30 → 30
  • Every100 ms
  • Testing

Bits 4 to 15 of the reply, 12 bits.

Formula
(val ÷ 50 − 40.96)
Range
-40.94 to 40.94 m/s²
Unit
m/s²

In testing for 2006 to 2008, 2010 to 2014. Not supported for 2009.

Longitudinal acceleration PEUGEOT_LNG_G

  • Request22 29 62
  • Service 22DID 2962
  • ModuleDA30 → 30
  • Every100 ms
  • Testing

Bits 20 to 31 of the reply, 12 bits.

Formula
(val ÷ 50 − 40.96)
Range
-40.94 to 40.94 m/s²
Unit
m/s²

In testing for 2006 to 2008, 2010 to 2014. Not supported for 2009.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.