Pelican
Get the app

Mitsubishi Eclipse Cross

Transmission parameters

The Mitsubishi Eclipse Cross has 47 transmission parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Accelerator pedal MITSUBISHI_CVT_ACCELERATOR

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 7 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Accelerator pedal MITSUBISHI_CVT_ACCELERATOR

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 7 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Anti-lock brake actuator signal MITSUBISHI_CVT_ABS_ACTUATOR_SIG

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 23 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Clutch 1 slip speed MITSUBISHI_CLUTCH_1_SLIP_AT_VSS

  • Request21 A6
  • Service 21PID A6
  • Module7E1
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 rpm
Unit
rpm

In testing for 2018 to 2026.

Clutch 1 temperature MITSUBISHI_CLUTCH_1_T

  • Request21 A5
  • Service 21PID A5
  • Module7E1
  • Every5 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val − 50)
Range
-50 to 65485 °C
Unit
°C

In testing for 2018 to 2026.

Clutch 2 temperature MITSUBISHI_CLUTCH_2_T

  • Request21 A5
  • Service 21PID A5
  • Module7E1
  • Every5 s
  • Testing

Bits 16 to 31 of the reply, 16 bits.

Formula
(val − 50)
Range
-50 to 65485 °C
Unit
°C

In testing for 2018 to 2026.

Current gear MITSUBISHI_AT_CUR_GEAR

  • Request21 04
  • Service 21PID 04
  • Module7E1
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2018 to 2026.

Current gear ratio MITSUBISHI_CURRENT_GEAR_AT_RATIO

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 32 to 39 of the reply, 8 bits.

Formula
(val ÷ 100)
Range
0 to 2.55
Unit
Number

In testing for 2018 to 2026.

Drive selected MITSUBISHI_CVT_SELECTOR_D

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 0 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Fluid degradation MITSUBISHI_CVT_OIL_DEGRADATION

Pelican can show this parameter as the CVT deterioration.

  • Request21 10
  • Service 21PID 10
  • Module7E1
  • Every3600 s
  • Testing

Bits 224 to 239 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

In testing for 2018 to 2026.

Fluid degradation, output 3 MITSUBISHI_CVT_OUT3_OIL_DEGRADATION

  • Request21 10
  • Service 21PID 10
  • Module7E1
  • Every3600 s
  • Testing

Bits 192 to 207 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

In testing for 2018 to 2026.

Gear MITSUBISHI_GEAR

  • Request22 15 0E
  • Service 22DID 150E
  • ModuleDA18 → 18
  • Every5 s
  • Testing

Bits 72 to 79 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2018 to 2026.

Gear number MITSUBISHI_CVT_GEAR_AT_NUMBER

  • Request21 06
  • Service 21PID 06
  • Module7E1
  • Every250 ms
  • Testing

Bits 16 to 23 of the reply, 8 bits.

Formula
(val + 1)
Range
1 to 256
Unit
Number

In testing for 2018 to 2026.

Input speed MITSUBISHI_INPUT_VSS

  • Request21 02
  • Service 21PID 02
  • Module7E1
  • Every250 ms
  • Testing

Bits 8 to 23 of the reply, 16 bits.

Formula
(val ÷ 2)
Range
0 to 32767.5 rpm
Unit
rpm

In testing for 2018 to 2026.

Input torque MITSUBISHI_AT_INPUT_TORQUE

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 56 to 63 of the reply, 8 bits. The value is signed.

Formula
(val × 32 ÷ 5)
Range
-819.2 to 812.8 N·m
Unit
N·m

In testing for 2018 to 2026.

Line pressure MITSUBISHI_AT_LINE_PRES

  • Request21 04
  • Service 21PID 04
  • Module7E1
  • Every250 ms
  • Testing

Bits 24 to 31 of the reply, 8 bits.

Formula
(val × 6.3 ÷ 255)
Range
0 to 6.3
Unit
Raw value

In testing for 2018 to 2026.

Lock-up solenoid monitor current MITSUBISHI_CVT_LU_SOLENOID_MONITOR_MA

  • Request21 05
  • Service 21PID 05
  • Module7E1
  • Every1 s
  • Testing

Bits 48 to 63 of the reply, 16 bits.

Formula
val
Range
0 to 65535 mA
Unit
mA

In testing for 2018 to 2026.

Lock-up solenoid output current MITSUBISHI_CVT_LU_SOLENOID_OUTPUT_MA

  • Request21 05
  • Service 21PID 05
  • Module7E1
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 mA
Unit
mA

In testing for 2018 to 2026.

Lock-up/select changeover solenoid monitor MITSUBISHI_CVT_LU_SEL_CHANGEOVER_SOL_MONITOR

  • Request21 05
  • Service 21PID 05
  • Module7E1
  • Every1 s
  • Testing

Bit 115 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Lock-up/select changeover solenoid output MITSUBISHI_CVT_LU_SEL_CHANGEOVER_SOL_OUTPUT

  • Request21 05
  • Service 21PID 05
  • Module7E1
  • Every1 s
  • Testing

Bit 107 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Low selected MITSUBISHI_CVT_SELECTOR_L

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 5 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Neutral selected MITSUBISHI_CVT_SELECTOR_N

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 1 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Operating time MITSUBISHI_CVT_TOTAL_TIME

  • Request21 10
  • Service 21PID 10
  • Module7E1
  • Every3600 s
  • Testing

Bits 32 to 47 of the reply, 16 bits.

Formula
(val ÷ 6)
Range
0 to 10922.5
Unit
Raw value

In testing for 2018 to 2026.

Output speed MITSUBISHI_OUTPUT_VSS

  • Request21 02
  • Service 21PID 02
  • Module7E1
  • Every250 ms
  • Testing

Bits 24 to 39 of the reply, 16 bits.

Formula
(val ÷ 2)
Range
0 to 32767.5 rpm
Unit
rpm

In testing for 2018 to 2026.

Paddle shift mode MITSUBISHI_CVT_SELECTOR_DS_7E1_06

  • Request21 06
  • Service 21PID 06
  • Module7E1
  • Every250 ms
  • Testing

Bit 12 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Park selected MITSUBISHI_CVT_SELECTOR_P

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 3 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Primary pressure MITSUBISHI_PRIMARY_PRES

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 96 to 103 of the reply, 8 bits.

Formula
(val × 3.627392)
Range
0 to 924 psi
Unit
psi

In testing for 2018 to 2026.

Primary pressure MITSUBISHI_PRIMARY_PRES_7E1_01

  • Request21 01
  • Service 21PID 01
  • Module7E1
  • Every1 s
  • Testing

Bits 24 to 31 of the reply, 8 bits.

Formula
(val × 1.332854 − 85.26)
Range
-85.26 to 254 psi
Unit
psi

In testing for 2018 to 2026.

Primary pulley speed MITSUBISHI_CVT_PRIMARY_VSS

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val × 32 − 64)
Range
-64 to 8096 rpm
Unit
rpm

In testing for 2018 to 2026.

Real engine torque MITSUBISHI_AT_REAL_ENGINE_TORQUE

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 40 to 47 of the reply, 8 bits. The value is signed.

Formula
(val × 32 ÷ 5)
Range
-819.2 to 812.8 N·m
Unit
N·m

In testing for 2018 to 2026.

Reverse selected MITSUBISHI_CVT_SELECTOR_R

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 2 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Secondary pressure MITSUBISHI_SECONDARY_PRES

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 88 to 95 of the reply, 8 bits.

Formula
(val × 3.627392)
Range
0 to 924 psi
Unit
psi

In testing for 2018 to 2026.

Secondary pulley speed MITSUBISHI_CVT_SECONDARY_VSS

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 8 to 15 of the reply, 8 bits.

Formula
(val × 64 − 128)
Range
-128 to 16192 rpm
Unit
rpm

In testing for 2018 to 2026.

Sleep revolution MITSUBISHI_AT_SLEEP_REVOLUTION

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 16 to 23 of the reply, 8 bits. The value is signed.

Formula
val
Range
-128 to 127 rpm
Unit
rpm

In testing for 2018 to 2026.

Slip speed MITSUBISHI_SLIP_AT_VSS

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 24 to 31 of the reply, 8 bits. The value is signed.

Formula
val
Range
-128 to 127 rpm
Unit
rpm

In testing for 2018 to 2026.

Slip speed MITSUBISHI_SLIP_AT_VSS_7E1_02

  • Request21 02
  • Service 21PID 02
  • Module7E1
  • Every250 ms
  • Testing

Bits 64 to 71 of the reply, 8 bits.

Formula
(val − 51)
Range
-51 to 204 rpm
Unit
rpm

In testing for 2018 to 2026.

Sport mode selected MITSUBISHI_CVT_SELECTOR_DS

  • Request21 06
  • Service 21PID 06
  • Module7E1
  • Every250 ms
  • Testing

Bit 3 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Stability control actuator signal MITSUBISHI_CVT_ASC_ACTUATOR_SIG

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 17 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Target gear ratio MITSUBISHI_TARGET_GEAR_AT_RATIO

  • Request21 04
  • Service 21PID 04
  • Module7E1
  • Every250 ms
  • Testing

Bits 8 to 15 of the reply, 8 bits.

Formula
(val ÷ 100)
Range
0 to 2.55
Unit
Number

In testing for 2018 to 2026.

Torque ratio MITSUBISHI_AT_TORQUE_RATIO

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 64 to 71 of the reply, 8 bits.

Formula
(val × 3.98 ÷ 255)
Range
0 to 3.98
Unit
Number

In testing for 2018 to 2026.

Traction control actuator signal MITSUBISHI_CVT_TCL_ACTUATOR_SIG

  • Request21 07
  • Service 21PID 07
  • Module7E1
  • Every250 ms
  • Testing

Bit 19 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2018 to 2026.

Transmission fluid temperature MITSUBISHI_AT_ATF_T

Pelican can show this parameter as the transmission fluid temperature.

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 72 to 79 of the reply, 8 bits.

Formula
(val − 55)
Range
-55 to 200 °C
Unit
°C

In testing for 2018 to 2026.

Transmission fluid temperature MITSUBISHI_ATF_T

Pelican can show this parameter as the transmission fluid temperature.

  • Request21 02
  • Service 21PID 02
  • Module7E1
  • Every250 ms
  • Testing

Bits 40 to 47 of the reply, 8 bits.

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

In testing for 2018 to 2026.

Transmission fluid temperature MITSUBISHI_ATF_T_DA18_2170

Pelican can show this parameter as the transmission fluid temperature.

  • Request22 21 70
  • Service 22DID 2170
  • ModuleDA18 → 18
  • Every5 s
  • Testing

Bits 232 to 239 of the reply, 8 bits.

Formula
(val − 40)
Range
-40 to 215 °C
Unit
°C

In testing for 2018 to 2026.

Transmission fluid temperature, pan MITSUBISHI_ATF_T_PAN

  • Request22 15 0E
  • Service 22DID 150E
  • ModuleDA18 → 18
  • Every5 s
  • Testing

Bits 48 to 55 of the reply, 8 bits.

Formula
(val − 50)
Range
-50 to 205 °C
Unit
°C

In testing for 2018 to 2026.

Transmission fluid temperature, pipe MITSUBISHI_ATF_T_PIPE

  • Request22 15 0E
  • Service 22DID 150E
  • ModuleDA18 → 18
  • Every5 s
  • Testing

Bits 40 to 47 of the reply, 8 bits.

Formula
(val − 50)
Range
-50 to 205 °C
Unit
°C

In testing for 2018 to 2026.

Transmission temperature MITSUBISHI_T_M_T

Pelican can show this parameter as the transmission fluid temperature.

  • Request21 33
  • Service 21PID 33
  • Module7E1
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
(val − 50)
Range
-50 to 205 °C
Unit
°C

In testing for 2018 to 2026.

Transmission temperature sensor count MITSUBISHI_CVT_T_RAW

  • Request21 03
  • Service 21PID 03
  • Module7E1
  • Every250 ms
  • Testing

Bits 104 to 111 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2018 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.