MG HectorLight parametersThe MG Hector has 1 light parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardHeadlights on MG_DRLRequest22 D1 17Service 22DID D117Module740 → 748Every5 sTestingBit 0 of the reply.FormulavalRange0 to 1UnitOff or onIn testing for 2019 to 2022, 2024 to 2026. Not supported for 2023.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Headlights on MG_DRLRequest22 D1 17Service 22DID D117Module740 → 748Every5 sTestingBit 0 of the reply.FormulavalRange0 to 1UnitOff or onIn testing for 2019 to 2022, 2024 to 2026. Not supported for 2023.
