Mazda MX-30Light parametersThe Mazda MX-30 has 1 light parameter.● Confirmed◆ In testing○ Supported× Not supportedHow to read parameter cardsHow to read a parameter cardBrake light switch MX30_BRAKE_LIGHT_SWITCHConfirmedRequest22 2B 00Service 22DID 2B00Module760 → 768Every250 msTesting for 2020 to 2021, 2023 to 2026Example reply from a 2022 Mazda MX-30.Bit 0 of the reply.0b0 = 0 → 0FormulavalRange0 to 1UnitOff or onConfirmed for 2022. In testing for 2020 to 2021, 2023 to 2026.The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.Where the parameter is in the response, and how Pelican converts the raw value into a value.A real reply, decoded. The raw value comes first, then the reading.Which model years have tested this parameter.Brake light switch MX30_BRAKE_LIGHT_SWITCHConfirmedRequest22 2B 00Service 22DID 2B00Module760 → 768Every250 msTesting for 2020 to 2021, 2023 to 2026Example reply from a 2022 Mazda MX-30.Bit 0 of the reply.0b0 = 0 → 0FormulavalRange0 to 1UnitOff or onConfirmed for 2022. In testing for 2020 to 2021, 2023 to 2026.
