Pelican
Get the app

Mazda CX-5

Cruise control parameters

The Mazda CX-5 has 2 cruise control parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Distance from bumper to target CX5_CC_TGT_DISTConfirmed

  • Request22 D9 01
  • Service 22DID D901
  • Module793 → 79B
  • Every250 ms
  • Testing for 2013 to 2015

Example reply from a 2016 Mazda CX-5.

Bits 8 to 15 of the reply, 8 bits.

0x02 = 2 → (2 ÷ 4) = 0.5 m

Formula
(val ÷ 4)
Range
0 to 63.75 m
Unit
m

Confirmed for 2016. In testing for 2013 to 2014. Not supported for 2015, 2018 to 2025.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Cruise control voltage CX5_SCCS_V

0.0V = On/Off Switch depressed, 1.1V = Cancel depressed, 3.1V = Set/- switch depressed, 4.2V = Res/+ switch depressed, 5.0V = Normal

  • Request22 A2 16
  • Service 22DID A216
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 5 ÷ 65535)
Range
0 to 5 V
Unit
V

In testing for 2013 to 2015, 2026. Not supported for 2016 to 2025.

Distance from bumper to target CX5_CC_TGT_DISTConfirmed

  • Request22 D9 01
  • Service 22DID D901
  • Module793 → 79B
  • Every250 ms
  • Testing for 2013 to 2015

Example reply from a 2016 Mazda CX-5.

Bits 8 to 15 of the reply, 8 bits.

0x02 = 2 → (2 ÷ 4) = 0.5 m

Formula
(val ÷ 4)
Range
0 to 63.75 m
Unit
m

Confirmed for 2016. In testing for 2013 to 2014. Not supported for 2015, 2018 to 2025.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.