Pelican
Get the app

Mazda CX-3

Transmission parameters

The Mazda CX-3 has 1 transmission parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Transmission temperature v6 CX3_TRANS_T_V6Confirmed

  • Request22 1E 1C
  • Service 22DID 1E1C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2016, 2020 to 2026

Example reply from a 2019 Mazda CX-3.

Bits 0 to 15 of the reply, 16 bits.

0x0068 = 104 → (104 × 9 ÷ 80 + 32) = 43.7 °F

Formula
(val × 9 ÷ 80 + 32)
Range
0 to 7000 °F
Unit
°F

Confirmed for 2015, 2017 to 2019. In testing for 2016, 2020, 2022 to 2026. Not supported for 2021.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Transmission temperature v6 CX3_TRANS_T_V6Confirmed

  • Request22 1E 1C
  • Service 22DID 1E1C
  • Module7E1 → 7E9
  • Every1 s
  • Testing for 2016, 2020 to 2026

Example reply from a 2019 Mazda CX-3.

Bits 0 to 15 of the reply, 16 bits.

0x0068 = 104 → (104 × 9 ÷ 80 + 32) = 43.7 °F

Formula
(val × 9 ÷ 80 + 32)
Range
0 to 7000 °F
Unit
°F

Confirmed for 2015, 2017 to 2019. In testing for 2016, 2020, 2022 to 2026. Not supported for 2021.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.