Pelican
Get the app

Mazda 3

MAZDA3_EVAP parameters

The Mazda 3 has 1 MAZDA3_EVAP parameter.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Evaporative vapor pressure sensor voltage MAZDA3_EVAP_VConfirmed

  • Request22 03 8E
  • Service 22DID 038E
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2004 to 2010, 2012 to 2013, 2016 to 2017, 2019 to 2020, 2022, 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 5.0048876)
Range
0 to 5 V
Unit
V

Confirmed for 2011, 2014 to 2015, 2018, 2021, 2023 to 2025. In testing for 2004 to 2006, 2008 to 2010, 2012 to 2013, 2016 to 2017, 2019, 2022, 2026. Not supported for 2007, 2020.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Evaporative vapor pressure sensor voltage MAZDA3_EVAP_VConfirmed

  • Request22 03 8E
  • Service 22DID 038E
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2004 to 2010, 2012 to 2013, 2016 to 2017, 2019 to 2020, 2022, 2026

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
(val ÷ 5.0048876)
Range
0 to 5 V
Unit
V

Confirmed for 2011, 2014 to 2015, 2018, 2021, 2023 to 2025. In testing for 2004 to 2006, 2008 to 2010, 2012 to 2013, 2016 to 2017, 2019, 2022, 2026. Not supported for 2007, 2020.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.