Lincoln Navigator

LINCOLN_HPFP parameters

The Lincoln Navigator has 2 LINCOLN_HPFP parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

High pressure fuel pressure desired LINCOLN_HPFP_DES

  • Request22 03 DC
  • Service 22DID 03DC
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 1.450377397)
Range
0 to 3500 psi
Unit
psi

In testing for 1998 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

High pressure fuel pressure desired LINCOLN_HPFP_DES

  • Request22 03 DC
  • Service 22DID 03DC
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 1.450377397)
Range
0 to 3500 psi
Unit
psi

In testing for 1998 to 2026.

High pressure fuel rail sensor voltage LINCOLN_HPFP_V

  • Request22 03 24
  • Service 22DID 0324
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
(val × 0.0048875855)
Range
0 to 5 V
Unit
V

In testing for 1998 to 2026.

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.