Pelican
Get the app

Land Rover Range Rover Sport

Control parameters

The Land Rover Range Rover Sport has 2 control parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Brake LANDROVER_BRAKE

  • Request22 FD 2A
  • Service 22DID FD2A
  • Module726
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 1
Unit
Number

In testing for 1988 to 2026.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Brake LANDROVER_BRAKE

  • Request22 FD 2A
  • Service 22DID FD2A
  • Module726
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 1
Unit
Number

In testing for 1988 to 2026.

Handbrake LANDROVER_HANDBRAKE

  • Request22 40 F7
  • Service 22DID 40F7
  • Module7E0
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 1
Unit
Number

In testing for 1988 to 2026.

Start your test drive today.

Download Pelican on the App Store

See all featuresCompare plansJoin the beta crew

Keyboard shortcuts

jk/↓↑
Move down or up through a list or a grid.
hl/←→
Move across a row or between cards.
Enter
Open the focused link.
f
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.